Dr An Deng

Lecturer
Dr An Deng
  Org Unit School of Civil, Environmental and Mining Engineering
  Email an.deng@adelaide.edu.au
  Telephone +61 8 8313 2830
  Location Floor/Room 1 44 ,  Engineering North ,   North Terrace

2017–Present

Senior Lecturer (Level C), The University of Adelaide

2011–2016

Lecturer (Level B), The University of Adelaide

2006–2011

Associate Professor, Hohai University

2005–2006

Lecturer, Hohai University

2000–2004

Research Assistant, The Pennsylvania State University

2000 (April–June)

Assistant Geotechnical Engineer, Shanghai Geotechnical Investigations & Design Institute Co., Ltd.

PhD in Civil Engineering, The Pennsylvania State University

MSc in Geotechnical Engineering, Tongji University

BEng in Civil Engineering, Central South University

Subject

Level

Credit

Years Taught

Geotechnical Engineering Design III

UG (3), PG

3.0

2016–2017

Construction Management and Surveying

UG (2)

3.0

2015

Advanced Civil Geotechnical Engineering

UG (4), PG

3.0

2013–2017

Geotechnical Engineering IIA

UG (2)

3.0

2012–2017

Soil Mechanics

UG (3)

3.5

2005–2011

Laboratory Soil Testing

UG (3)

0.5

2005–2011

Risk and Reliability Analysis in Geotechnical Engineering

PG

2.0

2010–2011

Introductory Geoenvironmental Engineering

PG

2.0

2008–2011

Technical English Learning

PG

2.0

2005–2007

▪ Characterisation of soils and composite geomaterials

▪ Beneficial reuse of solid waste materials

▪ Testing and modelling of soil consolidation

▪ Electrokinetic remediation and modelling

 

Book Chapters

4.

A Deng and Y-T Hung, 2013. Reuse of foundry sand as construction material, chapter 7 in: Handbook of Environment and Waste Management. Volume 2: Land and Groundwater Pollution Control. Eds: Y-T Hung, L K Wang and N K Shammas. World Scientific, pp. 491–549.

3.

A Deng, Y-T Hung and L K Wang, 2008. Management, minimization, and recycle of metal casting wastes, chapter 4 in: Waste Treatment in the Metal Manufacturing, Forming, Coating, and Finishing Industries. Eds: N K Shammas, Y-T Hung and L K Wang. CRC Press, pp. 151–197.

2.

O S Amuda, A Deng, A O Alade and Y-T Hung, 2008. Conversion of sewage sludge to biosolids, chapter 2 in: Handbook of Environmental Engineering, Volume 7: Biosolids Engineering and Management. Eds: L K Wang, N K Shammas and Y-T Hung. The Humana Press, Totowa, NJ, pp. 65–119.

1.

A Deng, 2006. Waste foundry sand environmental characteristics and its use in flowable fill, chapter 5 in: Advance in Geotechnique 2006. Ed: H Liu. Hohai University Press, Nanjing, pp. 7084. (in Chinese)




Peer Refereed Journal Articles

39.

H-B Wang, A Deng and P Yang, 2017. Strength and stiffness of stabilized alluvial silt under frost actions. Advances in Materials Science and Engineering. vol. 2017, Article ID 5605471.

38.

A Deng and Y-D Zhou, 2015. Modeling electroosmosis and surcharge preloading consolidation. I: model formulation. Journal of Geotechnical and Geoenvironmental Engineering. 10.1061/(ASCE)GT.1943-5606.0001417, 04015093.

37.

A Deng and Y-D Zhou, 2015. Modeling electroosmosis and surcharge preloading consolidation. II: validation and simulation results. Journal of Geotechnical and Geoenvironmental Engineering. 10.1061/(ASCE)GT.1943-5606.0001418, 04015094.

36.

Y-D Zhou and A Deng, 2014. A piecewise-linear finite-difference model for one-dimensional large strain electro-osmosis consolidation. Chinese Journal of Underground Space and Engineering, 10(3), 552–558. (in Chinese)

35.

Y-D Zhou, A Deng and C Wang, 2013. Finite-difference model for one-dimensional electro-osmotic consolidation. Computers and Geotechnics, 54, 152165.

34.

Y-T Yu, A Deng and Q-H Yu, 2013. Experimental study on frost heaving behavior of WFS-FA-EPS fills. Geotechnical Engineering Technique, 27, 29–32. (in Chinese)

33.

Y-D Zhou, B-T Wang and A Deng, 2013. Piecewise-linear model for electro-osmosis-surcharge preloading coupled consolidation. Chinese Journal of Geotechnical Engineering, 35(12), 23112316. (in Chinese)

32.

D-Q Pan, A Deng and Y-D Zhou, 2013. Study on electric charges accumulation between soil-electrode interface in electroosmosis. Water Resources and Power, 31(5), 223226. (in Chinese)

31.

S-W Qi and A Deng, 2012. Numerical study on one-dimensional frost heave amount of composite backfill. Journal of Disaster Prevention and Mitigation Engineering, 32(5), 600605. (in Chinese)

30.

X Fang and A Deng, 2012. Numerical simulation of heat conduction in composite backfill. Journal of Disaster Prevention and Mitigation Engineering, 32(5), 606610. (in Chinese)

29.

Z-Y He, A Deng, H-B Wang and L Ni, 2012. Investigation of moisture transfer and frost heave of composite geofoam under frost condition. Journal of Building Materials, 15(5), 703706, 729. (in Chinese)

28.

Z-Y He, A Deng, Y-D Zhou and H-B Wang, 2011. Effect of mixture proportions on compressive strength of composite geomaterial subjected to drying-wetting cycles. Journal of Building Materials, 14(6), 850853, 858. (in Chinese)

27.

A Deng, 2010. Reuse of waste foundry sand in structural flowable fill: Engineering performance investigation. International Journal of Environmental Engineering Science, 1(2), 125141.

26.

A Deng and Y Xiao, 2010. Measuring and modeling proportion-dependent stress-strain behavior of EPS-sand. International Journal of Geomechanics, ASCE, 10(6), 214222.

25.

A Deng, Y-T Yu and H-B Wang, 2010. Thermal conductivity of WFS-FA-EPS fills. Chinese Journal of Geotechnical Engineering, 32(8), 12971302. (in Chinese)

24.

A Deng and Y Xiao, 2010. Research on generalized Poisson’s ratio based on elliptic-parabolic yield surfaces model. Rock and Soil Mechanics, 31(5), 14451451. (in Chinese)

23.

A Deng and J-R Feng, 2010. Experimental study on sand-shredded tire lightweight fills. Journal of Building Materials, 13(1), 116120. (in Chinese)

22.

H-L Liu, J Chu and A Deng, 2009. Use of large-diameter, cast-in situ concrete pipe piles for embankment over soft clay. Canadian Geotechnical Journal, 46(8), 915927.

21.

H-M Tan, H-L Liu and A Deng, 2009. Numerical analyses on geogrid-reinforced cushion in pile-supported composite foundation. Geotechnical Engineering Journal, 40(1), 2530.

20.

A Deng, 2009. Contaminants in waste foundry sand and its leachate. International Journal of Environment and Pollution, 38(4), 425443.

19.

A Deng, 2009. An overview on beneficial reuses of waste foundry sand as construction materials. Chinese Journal of Environmental Engineering, 3(11), 19311937. (in Chinese)

18.

A Deng and J-R Feng, 2009. Effect of scrap tire bead addition on shear behavior of sand. Journal of PLA University of Science and Technology, 10(5), 483487. (in Chinese)

17.

Y Xiao and A Deng, 2009. Stress-strain analyses of sand-EPS beads lightweight fills based upon elliptic-parabolic yield surfaces model. Chinese Journal of Geotechnical Engineering, 31(9), 14671471. (in Chinese)

16.

A Deng and Y-T Yu, 2009. Influence of freeze-thaw cycles on compressive strength of WFS-FA-EPS beads lightweight fills. Journal of Building Materials, 12(4), 448452. (in Chinese)

15.

A Deng and Y Xiao, 2008. Shear behavior of sand-expanded polystyrene beads lightweight fills. Journal of Central South University of Technology, 15(sp2), 174179.

14.

A Deng and P J Tikalsky, 2008. Geotechnical and leaching properties of flowable fill incorporating waste foundry sand. Waste Management, 28(11), 21612170.

13.

H-L Liu, A Deng and Y Shen, 2008. Shear behavior of coarse aggregates for dam construction under varied stress paths. Water Science and Engineering, 1(1), 6377.

12.

A Deng and Y Xiao, 2008. Proportion-based constitutive model for sand-EPS beads lightweight fills. Journal of Hunan University (Natural Sciences), 35(11 sp.), 69. (in Chinese)

11.

A Deng, Y Xiao and H-L Liu, 2008. Engineering behavior of lightweight fills of sand-EPS beads. Chinese Journal of Geotechnical Engineering, 30(8), 11401145. (in Chinese)

10.

Q Zhou, A Deng, W-F Han, S-X Chai and P Wang, 2007. Durability of stabilized coastal saline soils: Water-related stability and freeze-thaw resistance. Rock and Soil Mechanics, 28(6), 11291132. (in Chinese)

9.

H-L Liu, A Deng and J Chu, 2006. Effect of different mixing ratios of polystyrene pre-puff beads and cement on the mechanical behaviour of lightweight fill. Geotextiles and Geomembranes, 24(6), 331338.

8.

A Deng and P J Tikalsky, 2006. Metallic characterization of foundry by-products per waste streams and leaching protocols. Journal of Environmental Engineering, ASCE, 132(6), 586595.

7.

J-J Cao and A Deng, 2006. Centrifugal loading finite element method for slope stability analysis. Chinese Journal of Geotechnical Engineering, 28, Supp., pp. 13361339. (in Chinese)

6.

Q Zhou, W-F Han, A Deng, S-X Chai and P Wang, 2006. Influences on unconfined compressive strength of stabilized coastal saline soils. Chinese Journal of Geotechnical Engineering, 28(9), 11771180. (in Chinese)

5.

H-L Liu, K Fei, A Deng and T Zhang, 2005. Erective sea embankment with PCC piles. China Ocean Engineering, 19(2), 339348.

4.

A Deng, 2001. The influence of different soil properties on stabilization behavior of reinforced soils. Soil Engineering and Foundation, 15(2), 3134. (in Chinese)

3.

A Deng and J-Y Yuan, 2000. Lab testing on industrial waste cementitious used in mixing columns. Journal of Building Materials, 3(4), 382388. (in Chinese)

2.

A Deng, Y Li and J-Y Yuan, 2000. Test study on comparison between industry waste cement and ordinary cement used in soil Strengthening. Building Science, 16(2), 3134. (in Chinese)

1.

A Deng, J-Y Yuan and Y Li, 2000. Testing study on a new type of agent applied in deep mixing columns. Journal of Building Materials, 3(1), 8892. (in Chinese)

Top

 

Conference Papers

29.

H Zhao, A Sang, A Deng and L Ge, 2016. Influences of stiffness ratio, friction coefficient and strength ratio on the macro behavior of cemented sand based on DEM. Proc. 7th International Conference on Discrete Element Methods (DEM7), Dalian, China, 1–4 August, pp. 485–495.

28.

C-J Yu, A Deng and G Nguyen, 2016. A constitutive model for cemented geomaterials. Proc. 10th International Conference on Structural Integrity and Failure (SIF), Adelaide, Australia, 12–15 July, pp. 202–207.

27.

Z-Y Fu, M Jaksa and A Deng, 2015. Quantifying the influence depth of dynamic compaction using the discrete element method. Proc. The XVI European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE 2015), Edinburgh, UK, 13–17 September, pp. 3581–3586.

26.

Y Liu, A Deng and M Jaksa, 2015. Discrete element modelling of geocell-reinforced track ballast under static and cyclic loading. Proc. The 12th Australia–New Zealand Conference on Geomechanics (ANZ 2015), Wellington, New Zealand, 22–25 February, pp. 279–286.

25.

A Deng and L McBride, 2014. Hydraulic conductivity of Hindmarsh clay amended by polymeric additive. Proc. The 7th International Conference on Environmental Geotechnics (7ICEG), Melbourne, Australia, 11–14 November, pp. 431–439.

24.

A Deng and C Wang, 2014. A finite difference model for electric field derived solute transport. Proc. The 7th International Conference on Environmental Geotechnics (7ICEG), Melbourne, Australia, 11–14 November, pp. 597–604.

23.

A Deng and J-R Feng, 2013. Modeling mechanical response of cemented EPS-backfill. Proc. Geo-Congress 2013: Stability and Performance of Slopes and Embankments III, San Diego, 3–7 March, pp. 2038–2047.

22.

A Deng and M Zhang, 2012. A consolidation model of single drain driven by combining vacuum preloading and electroosmosis. Proc. Geosynthetics Asia 2012 (GA 2012), Bangkok, 13–16 December, pp. 191–200.

21.

A Deng and B-B Sun, 2012. Modelling shear behaviour of EPS-sand based on elliptic-parabolic yield surfaces model. Proc. The 7th Australasian Congress on Applied Mechanics (ACAM 7), Adelaide, 9–12 December, pp. 1162–1168.

20.

A Deng and Y-D Zhou, 2012. A piecewise-linear numerical model for one-dimensional electroosmosis consolidation. Proc. The International Conference on Ground Improvement and Ground Control (ICGI 2012), Wollongong, 31 October–2 November, pp. 1369–1375.

19.

A Deng and Y-D Zhou, 2012. 1D compression calculation for composite geomaterial. Proc. The 11th Australia–New Zealand Conference on Geomechanics (ANZ 2012), Melbourne, 15–18 July, pp. 475–479.

18.

A Deng and J-R Feng, 2011. Shear behavior of sand-tire bead mixtures. Proc. International Conference on Advances in Geotechnical Engineering (ICAGE 2011), Perth, 7–9 November, pp. 615–620.

17.

A Deng, Y-D Zhou and Y-T Yu, 2011. Frost heave mitigation by incorporating expanded polystyrene bead into earth fill. ASCE GSP 222, Instrumentation, Testing, and Modeling of Soil and Rock Behavior, Proc. GeoHunan II 2011, Changsha, China, 6–9 June, ASCE, pp. 202–208.

16.

H-Q Guo, L Yu and A Deng, 2011. The GA improved ANN-synergy-bifurcation model method on slope slide forecasting. ASCE GSP 216, Slope Stability and Earth Retaining Walls, Proc. GeoHunan II 2011, Changsha, China, 6-9 June, ASCE, pp. 149–156.

15.

A Deng, Y-D Zhou and Z-Y He, 2011. Impact of drying-wetting on strength of a cement-treated lightweight fill. Soil Mechanics and Geotechnical Engineering: Challenges and Solutions, Proc. The 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering (14 ARC), Hong Kong, 23–27 May, 1316.

14.

A Deng and Y-T Yu, 2010. Thermal conductivity of WFS-FA-EPS mixture subjected to frost action. Environmental Geotechnics for Sustainable Development, Proc. The 6th International Conference on Environmental Geotechnics (6ICEG), New Delhi, India, 8–11 November, McGraw Hill, pp. 1006–1009.

13.

A Deng, Z-Y He and H-B Wang, 2010. Effects of freeze-thaw action and composition on compression strength of WFS-FA-EPS fills. ASCE GSP 203, Pavement Materials and Pavement Analysis, Proc. GeoShanghai 2010, Shanghai, China, 3–5 June, ASCE, pp. 364–371.

12.

A Deng and S-L Xu, 2010. Consolidating dredge soil by combining vacuum and dynamic compaction effort. ASCE GSP 207, Ground Improvement and Geosynthetics, Proc. GeoShanghai 2010, Shanghai, China, 3–5 June, ASCE, pp. 113–118.

11.

A Deng, 2009. Database management and data processes of environmental observations. Proc. The 1st International Conference on Information Science and Engineering (ICISE 2009), Nanjing, China, 26–28 November, IEEE, pp. 4819–4822.

10.

A Deng and J-R Feng, 2009. Granular lightweight fill composed of sand and tire scrap. ASCE GSP 189, Characterization, Modeling, and Performance of Geomaterials, Proc. GeoHunan 2009, Changsha, China, 3–6 August, ASCE, pp. 78–85.

9.

A Deng and Y Xiao, 2009. Modeling stress-strain behavior of sand-EPS beads lightweight fills based on Cam-Clay models. ASCE GSP 192, Recent Advancement in Soil Behavior, In Situ Test Methods, Pile Foundations, and Tunneling, Proc. GeoHunan 2009, Changsha, China, 3–6 August, ASCE, pp. 55–61.

8.

H-M Gao and A Deng, 2008. Vibration isolation behavior of EPS reinforced highway embankments. Geotechnical Engineering for Disaster Mitigation and Rehabilitation, Proc. GEDMAR08, Nanjing, China, 30 May–2 June, Science Press and Springer, pp. 622–629.

7.

Y-T Yu and A Deng, 2008. Mechanism and prevention of highway distress in seasonal frost area. Geotechnical Engineering for Disaster Mitigation and Rehabilitation, Proc. GEDMAR08, Nanjing, China, 30 May–2 June, Science Press and Springer, pp. 797–802.

6.

H-L Liu, Y-M Chen and A Deng, 2007. Post liquefaction analysis based on fluid mechanics. New Frontiers in Chinese and Japanese Geotechniques, Proc. The 3rd Sino–Japan Geotechnical Symposium, Chongqing, China, 4–7 November, China Communications Press, pp. 359–367.

5.

H-L Liu, A Deng and S-Q Wen, 2007. Analytical solution to settlement of cast-in-situ thin-wall concrete pipe pile composite foundation. Lecture Notes in Computer Science: Computational Science - ICCS 2007, V. 4489, Beijing, China, 27–30 May, Springer, pp. 1172–1179.

4.

A Deng, 2006. Using survival analysis to estimate statistics of censored environmental observations. Recent Development of Geotechnical and Geo-Environmental Engineering in Asia, Proc. The 4th Asian Joint Symposium on Geotechnical and Geoenvironmental Engineering, Dalian, China, 23–25 November, Dalian University of Technology Press, pp. 343–346.

3.

A Deng and P Tikalsky, 2006. Structural flowable fill using excess foundry sand: a pilot study. Recent Development of Geotechnical and Geo-Environmental Engineering in Asia, Proc. The 4th Asian Joint Symposium on Geotechnical and Geoenvironmental Engineering, Dalian, China, 23–25 November, Dalian University of Technology Press, pp. 555–558.

2.

A Deng and P J Tikalsky, 2005. Variation and correlation of flowable fill incorporating diverse excess foundry sands. Recent Developments of Geotechnical Engineering in Soft Ground, Proc. The 2nd China–Japan Geotechnical Symposium, Shanghai, China, 15–16 October, Tongji University Press, pp. 750–755.

1.

A Deng, 2005. Triggering and prevention of landslide disasters to cave dwellings in loess region of China. Geotechnical Engineering for Disaster Mitigation & Rehabilitation, Proc. GEDMR05, Singapore, 12–13 December, World Scientific Press, pp. 341–348.

Top

 

Professional Affiliations

2013–2015

Technical Committee Sustainability in Geotechnical Engineering (TC307), International Society of Soil Mechanics and Geotechnical Engineering.

2013

Committee, SA/NT Chapter, Australian Geomechanics Society, Engineers Australia.

2012–Pres.

Member, Australian Geomechanics Society, Engineers Australia.

2011–Pres.

Member, Australian Association for Engineering Education, Engineers Australia.

2007–Pres.

Member, International Society of Soil Mechanics and Geotechnical Engineering.

2007–2013

Vice General Secretary and Executive Committee Member, Jiangsu Society for Geomechanics and Engineering of China.

2007–2011

Member, China Civil Engineering Society.

2005–2011

Member, International Society of Rock Mechanics.

2005–2007

Secretary, East China Geomechanics and Engineering Friendship Association.

2003–2004

Guest Member, ADC60 Waste and Environmental Management Issues in Transportation, TRB.

Commitment in Conference Events

2013

2013 Geo-Congress of ASCE, San Diego, USA, 3–7 March, Session Co-Chair and Reviewer.

2012

International Conference on Ground Improvement and Ground Control, Wollongong, Australia, 30 October–2 November, Reviewer.

2011

2011 International Conference on Civil Engineering and Transportation, Jinan, China, 14–16 October, Reviewer.

2011

GeoHunan II 2011, Changsha, China, 9–11 June, Technical Organising Committee, Reviewer, Session Co-Chair, and Proc. Co-Editor (Advanced in Unsaturated Soil, Geo-Hazard, and Geo-Environmental Engineering, ASCE GSP 217, 266p, Eds: R Bulut, Y Tsukamoto, A Deng, T Katsumi and T Kokusho).

2008

GEDMAR08, Nanjing, China, 30 May–2 June, General Secretary, Reviewer, and Proc. Co-Editor (Geotechnical Engineering for Disaster Mitigation and Rehabilitation, Science Press (Beijing) and Springer, 1104p, Eds: H-L Liu, A Deng and J Chu).

2007

International Workshop on Advances in Computational Geomechanics and Geophysics, Beijing, China, 27–30 May, Reviewer.

2006

GeoShanghai 2006, Shanghai, China, 6–8 June, Reviewer.

2005

GEDMR05, Singapore, 12–13 December, Session Co-Chair.

2005

The 2nd World Forum of Chinese Scholars in Geotechnical Engineering, Nanjing, China, 20–21 August, Secretary, Reviewer, and Proc. Co-Editor (Proc. of the 2nd World Forum of Chinese Scholars in Geotechnical Engineering, 630p. Eds: H-L Liu, T Zhang and A Deng).

Journal Editorial Commitment

2012–Pres.

Associate Editor, Journal of Materials in Civil Engineering, ASCE.

2012–Pres.

Managing Editor, International Journal of Environment and Waste Management, Inderscience.

2012–Pres.

Managing Editor, International Journal of Environmental Engineering, Inderscience.

2010

Guest Co-Editor, Geomechanics and Geoengineering: An International Journal, Special Issue on Geo-Disaster Mitigation and Rehabilitation, v5(1), Taylor & Francis.

2009

Guest Editor, Geotechnical Engineering Journal, Special Issue on Disaster Mitigation and Rehabilitation, v40(1), Southeast Asian Geotechnical Society.

2008–2012

Handling Editor, International Journal of Environment and Waste Management, Inderscience.

2008–2012

Handling Editor, International Journal of Environmental Engineering, Inderscience.

Journal Paper Reviewing

Journal of Geotechnical and Geoenvironmental Engineering, ASCE

Canadian Geotechnical Journal, NRC

Soils and Foundations, JGS

International Journal of Geomechanics, ASCE

Journal of Materials in Civil Engineering, ASCE

Journal of Performance of Constructed Facilities, ASCE

Geosynthetics International, IGS

Geotechnical and Geological Engineering, Springer

Australian Journal of Civil Engineering, EA

Environmental Geotechnics, ICE

Chinese Journal of Geotechnical Engineering, CHES et al.

Research Grant Assessing

2015–2016

Australian Research Council (ARC), Discovery Project Scheme

2012

National Natural Science Foundation of China (NSFC), General Program & Joint-Fund Program

2011

National Natural Science Foundation of China (NSFC), General Program

Top

 

 

The information in this directory is provided to support the academic, administrative and business activities of the University of Adelaide. To facilitate these activities, entries in the University Phone Directory are not limited to University employees. The use of information provided here for any other purpose, including the sending of unsolicited commercial material via email or any other electronic format, is strictly prohibited. The University reserves the right to recover all costs incurred in the event of breach of this policy.

Entry last updated: Monday, 19 Jun 2017

To link to this page, please use the following URL:  http://www.adelaide.edu.au/directory/an.deng