MECH ENG 2100 - Design Practice

North Terrace Campus - Semester 1 - 2022

This course is an introduction to engineering design. It will also look at design of some specific mechanical sub-systems. Students will also learn effective communication skills by means of engineering reports and graphical communication. The course is divided into two major components: In Design for Function a number of power transmitting sub-systems, commonly used in mechanical design will be looked at. Students will design such sub-systems using both first principles and according to standard processes. Students will learn such fundamental aspects of design as using sources of design information; accuracy of engineering quantities; material selection; fabrication methods, and tolerances and fits. In Design Graphics students? graphical communication skills, including manual and computer aided drawing skills, are developed. This builds on existing knowledge learned in previous courses. Design graphics fundamentals are reviewed and extended, with hands-on training in the form of multiple assessments using state-of-the-art Computer Aided Design (CAD) software.

  • General Course Information
    Course Details
    Course Code MECH ENG 2100
    Course Design Practice
    Coordinating Unit School of Mechanical Engineering
    Term Semester 1
    Level Undergraduate
    Location/s North Terrace Campus
    Units 3
    Contact Up to 7 hours per week
    Available for Study Abroad and Exchange Y
    Incompatible MECH ENG 2018
    Assumed Knowledge MATHS 1012, (C&ENVENG 1010 or CEME 1004), MECH ENG 1007
    Restrictions Available to Bachelor of Engineering (Honours) (Mechanical), Bachelor of Technology & associated double degree students only
    Course Description This course is an introduction to engineering design. It will also look at design of some specific mechanical sub-systems. Students will also learn effective communication skills by means of engineering reports and graphical communication. The course is divided into two major components:

    In Design for Function a number of power transmitting sub-systems, commonly used in mechanical design will be looked at. Students will design such sub-systems using both first principles and according to standard processes. Students will learn such fundamental aspects of design as using sources of design information; accuracy of engineering quantities; material selection; fabrication methods, and tolerances and fits.

    In Design Graphics students? graphical communication skills, including manual and computer aided drawing skills, are developed. This builds on existing knowledge learned in previous courses. Design graphics fundamentals are reviewed and extended, with hands-on training in the form of multiple assessments using state-of-the-art Computer Aided Design (CAD) software.
    Course Staff

    Course Coordinator: Mr Eyad Hassan

    NameRoleBuilding/RoomEmail
    Eyad Hassan Lecturer Engineering South Building,S324G eyad.hassan@adelaide.edu.au
    Course Timetable

    The full timetable of all activities for this course can be accessed from Course Planner.

  • Learning Outcomes
    Course Learning Outcomes
    On successful completion of this course students will be able to:

     
    1 Use a systems approach  to design problems;
    2 Identify and analyse a number of sub-systems commonly used in mechanical design;
    3 Design such sub-systems using both first principles and according to standard processes;
    4 Review the principles of OH&S in a potentially hazardous environment;
    5 Interpret design requirements from a manufacturing perspective;
    6 Recognise the limitations that manufacturing methods can impose on design;
    7 Explain the problems that overtly simplified or complex designs can impose upon manufacturing;
    8 Demonstrated ability to work in a team environment; and
    9 Write a technical report.

     
    The above course learning outcomes are aligned with the Engineers Australia Stage 1 Competency Standard for the Professional Engineer.
    The course is designed to develop the following Elements of Competency: 1.1   1.2   1.3   1.4   1.5   2.1   2.2   2.3   2.4   3.1   3.2   3.3   3.4   3.5   3.6   

    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)

    Attribute 1: Deep discipline knowledge and intellectual breadth

    Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.

    1-3, 4-7, 9

    Attribute 2: Creative and critical thinking, and problem solving

    Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.

    1-7, 9

    Attribute 3: Teamwork and communication skills

    Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.

    1-3, 8, 9

    Attribute 4: Professionalism and leadership readiness

    Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.

    1, 3, 8

    Attribute 5: Intercultural and ethical competency

    Graduates are responsible and effective global citizens whose personal values and practices are consistent with their roles as responsible members of society.

    1, 8

    Attribute 8: Self-awareness and emotional intelligence

    Graduates are self-aware and reflective; they are flexible and resilient and have the capacity to accept and give constructive feedback; they act with integrity and take responsibility for their actions.

    8
  • Learning Resources
    Required Resources

    Design for Function Notes and Design Graphics Lecture slides, and Level 2 Labbook

    Recommended Resources

    Text books:

    • Shigley’s Mechanical Engineering Design (10th SI edition) by Budynas R.G. and Nisbett J.K., McGraw Hill, 2014
    • Wickert, J. (2015), An Introduction to Mechanical Engineering, Thomson
    • Litchfield D.R. Technical Drawing Handbook
    Online Learning

    The material available through MyUni:

    • Course Outline and Introduction
    • Course Content
    • Timetable
    • Lecture Notes
    • Assignments
    • Solutions
    • Past exams
    • Labbook

    MyUni is also used to communicate important announcements.

  • Learning & Teaching Activities
    Learning & Teaching Modes

    Lectures supported by modes developing material covered in lectures. These modes include problem-solving workshops, face-to-face student consulting, design graphics drop-in sessions, and laboratories.

    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    Course workload includes 10 Design for Function lectures, 3 Design Graphics lectures, 10 workshops, 1 laboratory class and up to 4 Design Graphics drop-in sessions.

    Learning Activities Summary

    Design for Function:

    • Design Process and basic calculations 1 lecture + 2 hrs workshop
    design calculations - report format precision and rounding of quantities
    free-body diagrams
    equations for linear and angular motion.

    • Friction Clutch Design 1 lecture + 2 hrs workshop
    function, classification
    plate clutch design - design parameters and equations
    friction materials

    • Brake Design 1 lecture + 2 hrs workshop
    function, classification
    band brake design - design parameters and equations

    • Flat Belt Drives 1 lecture + 2 hrs workshop
    geometry and belt construction
    design parameters and equations

    • V Belt & Chain Drives -1 lecture + 2 hrs workshop
    geometry and construction
    nomenclature
    design parameters and catalogue selection

    • Gear Drive Systems 1 lecture + 2 hrs workshop
    Nomenclature
    types and construction of gears
    design parameters and equations
    shaft loads

    • Rubbing Bearings 1 lecture + 2 hrs workshop
    operation principles
    material properties
    bearing selection

    • Oil Film Bearings 1 lecture + 2 hrs workshop
    operation principles
    design criteria and bearing selection

    • Rolling Element Bearings 2 lectures + 4 hrs workshop
    Classification
    types and characteristics
    selection procedure
    lubrication, seals, installation
    case study of bearing selection

    • Cams 1 lecture + 2 hrs workshop
    Cam and follower types
    Graphical design
    Cam curves
    Analytic Design

    Design Graphics:

    • Design Graphics 3 lectures + up to 4 x 2 hrs drop-in sessions
    Graphical Communication fundamentals
    Computer Aided Design
    Technical Drawings

    One 3 hour Laboratory

    Specific Course Requirements

    Laboratories: This course includes two laboratories: Engine Disassembly – 2 hrs; Introduction to Measurement – 2 hrs. Details provided in level 2 Labbook.

  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary
    Assessment Task Weighting (%) Individual/ Group Formative/ Summative
    Due (week)*
    Hurdle criteria Learning outcomes
    Design for Function-Workshop Reports (x3) 11.67 Group Summative Weeks 2-12 1. 2. 3. 5. 6. 7. 8. 9.
    Design for Function-Workshop Quizzes (x7) 23.33 Individual Summative Weeks 2-12 1. 2. 3. 5.
    Laboratories (x1) 10 Individual Formative Weeks 2-12 Min 35% 2. 3. 8. 9.
    Design Graphics Online Quizzes (x3) 3 Individual Summative Weeks 6-12 1. 5. 
    Design Graphics Assessment (x2) 17 Individual Summative Weeks 6-12 1. 5. 6.
    Final exam 35 Individual Summative 1. 3.
    Total 100
    * The specific due date for each assessment task will be available on MyUni.
     
    This assessment breakdown is registered as an exemption to the University's Assessment for Coursework Programs Policy. The exemption is related to the Procedures clause(s): 1. a. i    1. a. iii    1. b. 2.   
     
    This course has a hurdle requirement. Meeting the specified hurdle criteria is a requirement for passing the course.

    Assessment Related Requirements

    Students have to pass Design Project part of the course and obtain course total of at least 50%.

    The Laboratories are compulsory part of a course. If a lab session is missed or a lab report not handed in or a student fails to get at least 35% of the total possible lab marks, then that is grounds for FAILURE of the entire course.

    Assessment Detail

    Design for Function Workshops – group reports
    Design for Function Workshop -  online quizzes
    Design Graphics online quizzes and assessments
    Laboratory – assessment based on lab participation and a report;
    Final exam – open-book, 2 hours.

    Submission

    Workshop reports, Design Graphics Drawings and online quizzes are all are all submitted electronically though MyUni. A penalty for late submission will be applied – 10% per day including weekends. In special cases extensions can be granted on individual basis. A “turn-around” timeline on assessments and the provision of feedback to students is approximately 2 weeks.

    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through Access Adelaide.

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.

The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.