MECH ENG 2101 - Mechatronics IM
North Terrace Campus - Semester 2 - 2018
General Course Information
Course Code MECH ENG 2101 Course Mechatronics IM Coordinating Unit School of Mechanical Engineering Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact 36-hour lectures/tutorials, 6-hour practicals, 40-hour workshop practice Available for Study Abroad and Exchange Y Incompatible MECH ENG 2004 or MECH ENG 2011 Assumed Knowledge ELEC ENG 1008 or ELEC ENG 1009 & MECH ENG 1007 & MECH ENG 2021 Restrictions Available to BE (Mechanical), BE (Mechanical & Aerospace), BE (Mechanical & Automotive), BE (Mechanical & Sustainable Energy) and associated double degree students only Course Description To provide an introduction to the application of electronic control systems in mechanical and electrical engineering. To give framework of knowledge that allows students to develop an interdisciplinary understanding and integrated approach to mechatronic engineering. In the Workshop Practice component, organized during the semester break, students will become familiar with basic workshop practices, including machining and the use of hand tools. Small group practical sessions will be used to provide important hands-on experience with electro-pneumatic system and PLC based projects.
Course Coordinator: Dr Lei Chen
The full timetable of all activities for this course can be accessed from Course Planner.
Course Learning OutcomesOn successful completion of this course students will be able to:
1 Explain the architecture of mechatronic systems; 2 Design some simple measurement systems using different sensors; 3 Demonstrated ability to design basic control systems using different actuators; 4 Demonstrate an understanding of PLC programming; and 5 Demonstrate an understanding of analogue and digital interfacing.
The above course learning outcomes are aligned with the Engineers Australia Stage 1 Competency Standard for the Professional Engineer.
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 3.6
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1-5 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
1-5 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
5 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
5 Intercultural and ethical competency
- adept at operating in other cultures
- comfortable with different nationalities and social contexts
- Able to determine and contribute to desirable social outcomes
- demonstrated by study abroad or with an understanding of indigenous knowledges
1-5 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
2, 3, 5
Course notes – these are essential and required.
1 Principles of Measurement Systems, Bentley;
1 Introduction to engineering experimentation, Anthony J. Wheeler and Ahmad R. Ganji.
Learning & Teaching Activities
Learning & Teaching Modes
Lectures supported by problem-solving tutorials and practicals developing material covered in lectures.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
The required time commitment is 36 hours attendance at lectures, 36 hours of revising course material, 30 hours completing assignments, 20 hours preparing and completing practical reports, and 40 hours workshop practices.
Learning Activities Summary
Introduction to mechatronic systems (2 lectures – 5%)
Switching Devices (2 lectures – 6%)
Electro-pneumatic actuators (2 lectures – 6%)
Programmable logic controllers (3 lectures – 8%)
Stepping motors (3 lectures – 8%)
Measuring Solid Mechanical Quantities (6 lectures – 17%)
Measuring temperature (6 lectures – 17%)
Measuring fluid flow rate (6 lectures – 17%)
Introduction to Digital Systems (3 lectures – 8%)
Characteristics of Measurement Systems (3 lectures – 8%)
Specific Course Requirements
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
All assessment tasks are summative. There are 4 assignments, each worth 5% of the assessment and an open book exam worth 70%. In addition, there are two practical reports, each worth 5%. All assignments are due by 5pm on the due date. Details of each task are tabulated below.
Assessment Task Task Type Due Weighting% Learning Outcome Assignment 1 Written submission
5 1-5 Assignment 2 Written submission Week 7 5 1-5 Assignment 3 Written submission Week 9 5 1-5 Assignment 4 Written submission Week 11 5 1-5 Lab Report 1 On-line submission TBA 5 1-5 Lab Report 2 On-line submission TBA 5 1-5 Final Exam Exam on all parts of the course Exam period 70 1-5
Assessment Related Requirements
Assignment 1 is designed to enhance student knowledge and understanding of the switching devices, pneumatic actuators, stepping motors and PLC programming through completing this assignment.
Assignment 2 is designed to enhance student knowledge and understanding of the flowmeters through completing this assignment.
Assignment 3 is designed to enhance student knowledge and understanding of strain gauges and other sensors through completing this assignment.
Assignment 4 is designed to enhance student knowledge and understanding of the temperature sensors through completing this assignment.
The assessment criteria for the assignments are outlined below.
Item Assessment Criteria Assignments
Performance is judged by the extent to which students are able to:
- understand the concepts and principles obtained in the course;
- organise and interpret the engineering ideas logically;
- communicate the solutions effectively;
- use Mechatroinc terminology and notation correctly;
- critically evaluate the information obtained;
- pay attention to details and calculate precisely.
Performance is judged by the extent to which students are able to:
- describe the purpose, procedure, results and conclusions of an experiment;
- record data and observations concisely in an appropriate format;
- design correct circuits or programs;
- identify sources of error;
- draw conclusions based on the results of the experiment
All assignments must be submitted in the digital drop box in MyUni and a hard copy placed in the labelled box located on level 2 of Engineering South Building. Any assignments submitted as a hard copy must be accompanied by an assessment cover sheet available from Room S116 or near the assignment area. Late assignments will be penalised 10% per day (weekends and holidays are included). Extensions for assignments will only be given in exceptional circumstances and a case for this with supporting documentation can be made in writing after a lecture or via email to the lecturer. Hard copy assignments will be assessed and returned in 3 weeks of the due date. There will be no opportunities for re-submission of work of unacceptable standard. Due to the large size of the class feedback on assignments will be limited to in-class discussion resulting from questions from students.
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
- Academic Support with Maths
- Academic Support with writing and speaking skills
- Student Life Counselling Support - Personal counselling for issues affecting study
- International Student Support
- AUU Student Care - Advocacy, confidential counselling, welfare support and advice
- Students with a Disability - Alternative academic arrangements
- Reasonable Adjustments to Teaching & Assessment for Students with a Disability Policy
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangement Policy
- Academic Honesty Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.