Associate Professor Abdul Sheikh

Associate Professor Abdul Sheikh
 Position Associate Professor
 Org Unit School of Civil, Environmental and Mining Engineering
 Email abdul.sheikh@adelaide.edu.au
 Telephone +61 8 8313 6450
 Location Floor/Room 2 35 ,  Engineering North ,   North Terrace
  • Biography/ Background

    January 2008 – Present, Associate Professor, School of Civil, Environmental and Mining Engineering, University of Adelaide, Australia 

    February 2006 – October 2007, Associate Professor, Department of Mechanical Engineering, Aalborg University, Denmark

    June 1998 – December 2007, Professor, Associate Professor, Assistant Professor, Department of Ocean Engineering and Naval Architecture, Indian Institute of Technology, Kharagpur, India

    May 2003 – July 2003, Visiting Researcher, School of Engineering Sciences, University of Southampton, UK

    October 1993 – June 1998, Assistant Professor, Lecturer, Department of Applied Mechanics, Indian Institute of Engineering Science and Technology, Shibpur, India

  • Qualifications

    Doctor of Philosophy, Structural Engineering, Indian Institute of Technology, Kharagpur, 1995

    Master of Engineering, Structural Engineering, Calcutta University, 1987

    Bachelor of Engineering, Civil Engineering, Calcutta University, 1985

  • Teaching Interests

    Finite Element Analysis, Structural Analysis, Mechanics of Materials, Engineering Mechanics, Structural Stability, Structural Dynamics, Thin-walled Structures, Design of Steel Structures

     

  • Research Interests

    Innovative finite element modelling of stiffened plates and shells, and their static, dynamic and buckling response in linear and nonlinear ranges.  

    Development of new finite element techniques for efficient modelling of laminated composite, sandwich and smart structures based on higher order refined theories.

    Numerical simulation of high velocity ballistic impact response of laminated composite and sandwich panels.   

    Development of a fully coupled efficient beam model for thin-walled open and closed section laminated composite beams.  

    Numerical modelling of concrete and ultra-high performance concrete members subjected to blast loading. 

    Novel modelling techniques for straight/curved box-girder bridge deck structures and determination of and their load distributions.

    Micromechanics based coupled damage plasticity model for progressive failure analysis of laminated composite structures.

    Analytical and finite element model of steel concrete composite beams based on higher order theories in linear and nonlinear ranges.

  • Publications

    Journal Articles

     

    1.      A. H. Sheikh and M. Mukhopadhyay, Analysis of stiffened plates with arbitrary planform by the general spline strip method, Computers and Structures, Elsevier, Vol. 42(1), 53-67, 1992.

    2.      G. Sinha, A.H. Sheikh and M. Mukhopadhyay, A new finite element model for the analysis of arbitrary stiffened shells, Finite Element in Analysis and Design, Elsevier, Vol. 12, pp. 241-271, 1992.

    3.      A. H. Sheikh and M. Mukhopadhyay, Free vibration analysis of stiffened plates with arbitrary planform by the general spline strip method, Journal of Sound and Vibration, Elsevier, Vol. 162(1), 147-164, 1993.

    4.      A. H. Sheikh and M. Mukhopadhyay, Transverse vibration of plate structures with elastically restrained edges by spline finite strip method, Journal of Vibration and Acoustics, American Society of Mechanical Engineers, Vol. 115 (July), 295-302, 1993.

    5.      A. H. Sheikh and M. Mukhopadhyay, Forced vibration of plates with elastically restrained edges by spline finite strip method, Trans. Japan Society of Mechanical Engineers, Series C, Vol. 36 (3), 301-306, 1993.

    6.      D. Venugopal Rao, A. H. Sheikh and M. Mukhopadhyay, A finite element large deflection analysis of stiffened plates, Computers and Structures, Elsevier, Vol. 47(6), 987-993, 1993.

    7.      S.R. Rao, A. H. Sheikh and M. Mukhopadhyay, Large amplitude finite element flexural vibration of plates/stiffened plates, Journal of the Acoustical Society of America, Vol. 96(3), 3250-3257, 1993.

    8.      M. Mukhopadhyay and A. H. Sheikh, Large amplitude vibration of horizontally curved beam: A finite element approach, Journal of Sound and Vibration, Elsevier, Vol. 180, No. 2, pp. 239-251, 1995.

    9.      A. H. Sheikh and M. Mukhopadhyay, Large amplitude free flexural vibration of stiffened plates, American Institute of Aeronautics and Astronautics Journal, Vol. 34(11), 2377-2383, 1996.

    10.   S. Haldar, A.H. Sheikh and S.K. Sarkar, Finite element analysis of composite folded plates with elastically restrained edges, Journal of Reinforced Plastics and Composites, SAGE, Vol. 18(7), 622-641, 1999.

    11.   A.H. Sheikh and M. Muhkopadhyay, Geometric nonlinear analysis of stiffened plates by the spline finite strip method, Computers and Structures, Elsevier, Vol. 76, 765-785, 2000.

    12.   M. Mukhopadhyay and A.H. Sheikh, A new plate bending element for the analysis of thin plates of arbitrary shapes, International Journal of Applied Mechanics and Engineering, Poland, Vol. 5(2), 337-354, 2000.

    13.   A.H. Sheikh, P. Topdar and S. Halder, An appropriate FE model for through-thickness variation of displacement and potential in thin/moderately thick smart laminates, Composite Structures, Elsevier, Vol. 51(4), 401-409, 2001.

    14.   A.H. Sheikh and P. Dey, A new triangular element for the analysis of thick and thin plates, Communications in Numerical Methods in Engineering, Wiley, Vol. 17, 667-673, 2001.

    15.   A. H. Sheikh and M. Mukhopadhyay, Linear and nonlinear transient vibration analysis of stiffened plate structures, Finite Element in Analysis and Design, Elsevier, Vol. 38, 477-502, 2002.

    16.   A.H. Sheikh, S. Haldar and D. Sengupta, A high precision shear deformable element for the analysis of laminated composite plates of different shapes, Composite Structures, Elsevier, Vol. 55(3), 329-336, 2002.

    17.   A.H. Sheikh, A new concept to include shear deformation in a curved beam element, Journal of Structural Engineering, American Society of Civil Engineers, 128(3), 406-410, 2002.

    18.   A. Chakrabarti and A.H. Sheikh, A new triangular plate bending element based on higher order shear deformation theory for flexural vibration analysis of composite plates, International Journal of Structural Stability and Dynamics, World Scientific, Vol. 2(2), 163-184, 2002.

    19.   A.K.L. Srivastava, P.K. Datta and A.H. Sheikh, Transverse vibration of stiffened plates subjected to in-plane loads, Journal Aerospace Engineering, Institute of Engineers, India, Vol. 83, May, 1-5, 2002.

    20.   A.K.L. Srivastava, P.K. Datta and A.H. Sheikh, Vibration and dynamic instability of stiffened plates subjected to in-plane harmonic edge loading, International Journal of Structural Stability and Dynamics, World Scientific, Vol. 2(2), 185-206, 2002.

    21.   A.K.L. Srivastava, P.K. Datta and A.H. Sheikh, Parametric instability of stiffened plates subjected to uniform edge loading, Journal Aerospace Engineering, Institute of Engineers, India, Vol. 83, 45-48, 2002.

    22.   A.H. Sheikh, S. Haldar and D. Sengupta, Vibration of plates in different situations using a high precision shear deformable element, Journal of Sound and Vibration, Elsevier, Vol. 253(2), 329-345, 2002.

    23.   A.H. Sheikh, S. Haldar and D. Sengupta, A high precision shell element with shear deformation for the analysis of isotropic and composite shell, International Journal of Computational Engineering Science, World Scientific, Vol. 3(3), 227-290, 2002.

    24.   S. Haldar, D. Sengupta and A.H. Sheikh, A high precision shear deformable element for free vibration analysis of isptropic trapezoidal plate, Journal of Civil Engineering, Institute of Engineers, India, Vol. 83, 259-266,2003.

    25.   S. Haldar, D. Sengupta and A. H. Sheikh, Free vibration analysis of composite right angle triangular plate using a shear flexible element, Journal of Reinforced Plastics and Composites, SAGE, Vol. 22(3), 229-255, 2003.

    26.   A.K.L. Srivastava, P.K. Datta and A.H. Sheikh, Buckling and vibration of stiffened plates subjected to partial edge loading, International Journal of Mechanical Sciences, Elsevier, Vol. 45(1), 73-93, 2003.

    27.   A.K.L. Srivastava, P.K. Datta and A.H. Sheikh, Dynamic instability of stiffened plates subjected to non-uniform harmonic in-plane loading, Journal of Sound and Vibration, Elsevier, Vol. 262(5), 1171-1189, 2003.

    28.   A.H. Sheikh and A. Chakrabarti, A new plate bending element based on higher order shear deformation theory for the analysis of composite plates, Finite Element in Analysis and Design, Elsevier, Vol. 39(9), 883-903,2003.

    29.   P. Topdar, A.H. Sheikh and N. Dhang, Finite element analysis of composite and sandwich plates using a continuous inter-laminar shear stress model, Journal of Sandwich Structures and Materials, SAGE, Vol. 5, 207-231, 2003.

    30.   A.K.L. Srivastava, P.K. Datta and A.H. Sheikh, Buckling and vibration of stiffened plates subjected to in-plane concentrated load, International Journal of Structural Mechanics and Engineering, Techno Press, Vol. 45(1), 685-704, 2003.

    31.   S. Haldar, M.C. Manna and A.H. Sheikh, Static analysis of isotropic thin/thick skew plates by finite element method, International Journal of Applied Mechanics and Engineering, Poland, Vol. 8(2), 245-254, 2003.

    32.   A. Chakrabarti and A.H. Sheikh, Buckling of laminated composite plates by a new element based on higher order shear deformation theory, Mechanics of Advanced Materials and Structures, Taylor & Francis, Vol. 10(4), 303-317, 2003.

    33.   M.C. Manna, S. Haldar and A.H. Sheikh, Free vibration of isotropic thick/thin plates using a sub-parametric shear deformable element, International Journal of Applied Mechanics and Engineering, Poland, Vol. 8(3), 441-448, 2003.

    34.   A.K.L. Srivastava, P.K. Datta and A.H. Sheikh, Dynamic instability of stiffened plates with cutout subjected to in-plane uniform edge loading, International Journal of Structural Stability and Dynamics, World Scientific, Vol. 3(3), 391-403, 2003.

    35.   A.K.L. Srivastava, P.K. Datta and A.H. Sheikh, Parametric Instability of Stiffened Plates with Cutouts, Journal of Aeronautical Society of India, Vol. 55(4), 2003.

    36.   A.H. Sheikh, P. Dey and D Sengupta, Vibration of thick and thin plates using a new triangular element, Journal of Engineering Mechanics, American Society of Civil Engineers, Vol. 129(11), 1235-1244, 2003.

    37.   A.H. Sheikh, S. Haldar and D. Sengupta, Free flexural vibration of composite plates in different situations using a high precision triangular element, Journal of Vibration and Control, SAGE, Vol. 10(3), 371-386, 2004.

    38.   A.K.L. Srivastava, P.K. Datta and A.H. Sheikh, Transverse vibration of stiffened plates with cutouts subjected to in-plane forces, Journal of Shock and Vibration, IOS Press, Vol. 11(1), 9-19, 2004.

    39.   A.K.L. Srivastava, P.K. Datta and A.H. Sheikh, Parametric instability of stiffened plates, International Journal of Applied Mechanics and Engineering, Poland, Vol. 9(1), 169-180, 2004.

    40.   A. Chakrabarti and A.H. Sheikh, A new triangular element to model inter-laminar shear stress continuous plate theory, International Journal for Numerical Methods in Engineering, Wiley, Vol. 60(7), 1237-1257, 2004.

    41.   A. Chakrabarti and A.H. Sheikh, Vibration of laminate faced sandwich plate by a new refined element, Journal of Aerospace Engineering, American Society of Civil Engineers, Vol. 17(3), 123-134, 2004.

    42.   A. Chakrabarti and A.H. Sheikh, Behavior of laminated sandwich plates having interfacial imperfections by a new refined element, Computational Mechanics, Springer, Vol. 34(2), 87-98, 2004.

    43.   S.J. Hossain, P.K. Sinha and A.H. Sheikh, A finite element formulation for the analysis of laminated composite shells, Computers and Structures, Elsevier, Vol. 82(20/21), 1623-1638, 2004.  

    44.   P. Topdar, A. Chakrabarti and A.H. Sheikh, An efficient hybrid plate model for analysis and control of smart sandwich laminates, Computer Methods in Applied Mechanics and Engineering, Elsevier, Vol. 193(42-44), 4591-4610, 2004.

    45.   A. Chakrabarti and A.H. Sheikh, Analysis of skew composite plates using a new triangular element based on higher order shear deformation theory, Journal of Civil Engineering, Institute of Engineers, India, Vol. 85, 77-83, 2004.

    46.   A.H. Sheikh, S. Haldar and D. Sengupta, A high precision shear flexible element for vibration of composite shell, Journal of Shock and Vibration, IOS Press, Vol. 11(5/6), 585-596, 2004.

    47.   A.H. Sheikh, An efficient model for the incorporation of shear deformation in spline finite strip analysis of composite plates, International Journal of Computational Methods, World Scientific, Vol. 1(3), 491-505, 2004.

    48.   A. Chakrabarti and A.H. Sheikh, Analysis of imperfect composites and sandwich laminates subjected to in-plane partial edge loading, International Journal of Computational Methods, World Scientific, Vol. 2(2), 181-200, 2005.

    49.   A. Chakrabarti and A.H. Sheikh, Buckling of laminated sandwich plates subjected to partial edge compression, International Journal of Mechanical Sciences, Elsevier, Vol. 47(3), 418-436, 2005.

    50.   A. Chakrabarti and A.H. Sheikh, Analysis of laminated sandwich plates based on inter-laminar shear stress continuous plate theory, Journal of Engineering Mechanics, American Society of Civil Engineers, Vol. 131(4), 377-384, 2005.

    51.   A. Chakrabarti and A.H. Sheikh, Vibration of imperfect composite and sandwich laminates with in-plane partial edge load, Composite Structures, Elsevier, Vol. 71(2), 199-209, 2005.

    52.   S. Haldar and A.H. Sheikh, Free vibration analysis of isotropic and composite folded plates using a shear deformable element, Finite Element in Analysis and Design, Elsevier, Vol. 42(2), 208-226, 2005.

    53.   A.K.L. Srivastava, P.K. Datta and A.H. Sheikh, Dynamic stability of stiffened plates with cutout subjected to harmonic in-plane partial edge loading, International Journal of Crashworthiness, Taylor & Francis, Vol. 10(4), 403-417, 2005.

    54.   A. Chakrabarti and A.H. Sheikh, Dynamic instability of laminated sandwich plates using an efficient finite element model, Thin-walled Structures, Elsevier, Vol. 44(1), 57-68, 2006.

    55.   S.N. Patel, P.K. Datta and A.H. Sheikh, Buckling and dynamic instability analysis of stiffened shell   panels, Thin-walled Structures, Elsevier, Vol. 44(13), 321-333, 2006.

    56.   S.N. Patel, P.K. Datta and A.H. Sheikh, Dynamic instability analysis of laminated composite stiffened shell   panels subjected to in-plane harmonic edge loading, International Journal of Structural Engineering and Mechanics, Techno Press, Vol. 22(4), 2006.

    57.   Anupam Chakrabarti and Abdul Hamid Sheikh, Dynamic instability of laminated sandwich plates subjected to in-plane partial edge loading. Ocean Engineering Journal, Elsevier, Vol. 33(17-18), 2287-2309, 2006.

    58.   M.C. Manna, A.H. Sheikh and R. Bhattacharyya, A compressible finite element model for hyperelastic members under different modes of deformation, International Journal of Structural Engineering and Mechanics, Techno Press, Vol. 24, No. 2, 227-245, 2006.

    59.   A. Chakrabarti and A.H. Sheikh, Buckling of composite laminates subjected to in-plane partial edge compression using a refined plate theory, Journal of Reinforced Plastics and Composites, SAGE, Vol. 25, No. 11, 1189-1204, 2006.

    60.   A. Chakrabarti and A.H. Sheikh, Vibration and buckling of laminated sandwich plates having interfacial imperfections, European Journal of Mechanics, Part A - Solid, Elsevier, Vol. 25, No. 6, 981-995, 2006.

    61.   A. Chakrabarti, P. Topdar and A.H. Sheikh, Vibration of pre-stressed laminated sandwich plates with interfacial imperfections, Journal of Vibration and Acoustics, American Society of Mechanical Engineers, Vol. 128, No. 6, 673-681, 2006.

    62.   P. Topdar, A.H. Sheikh and N. Dhang, Response and control of smart laminates using a refined hybrid plate model, American Institute of Aeronautics and Astronautics Journal, Vol. 44, No. 11, 2636-2644, 2006.

    63.   A.K.L. Srivastava, P.K. Datta and A.H. Sheikh, Effect of configuration and stiffener length on vibration and dynamic instability, Advances in Vibration Engineering, India, Vol. 5(3), 207-220, 2006.

    64.   A. Chakrabarti and A.H. Sheikh, Vibration of composites and sandwich laminates subjected to in-plane partial edge loading, Composites Science and Technology, Elsevier, Vol. 67, No. 6, 1047-1057, 2007.

    65.   P. Topdar, A.H. Sheikh and N. Dhang, Vibration characteristics of smart composite/sandwich laminates using a refined hybrid plate model, International Journal of Mechanical Sciences, Elsevier, Vol. 49, No. 11, 1193-1203, 2007.

    66.   A. Chakrabarti and A.H. Sheikh, Buckling of laminated sandwich plates using an efficient plate model, International Shipbuilding Progress, IOS Press, Vol. 54, No. 1, 63-81, 2007.

    67.   S.N. Patel, P.K. Datta and A.H. Sheikh, Dynamic instability analysis of stiffened shell panels subjected to partial edge loading along the edges, International Journal of Mechanical Sciences, Elsevier, Vol. 49, No. 12, 1309-1324, 2007.

    68.   A.H. Sheikh and O.T. Thomsen, An efficient beam element for the analysis of laminated composite beams of thin-walled open and closed sections, Composite Science and Technology, Elsevier, Vol. 68(10-11), 2273-2281, 2008.

    69.   M.K. Pandit, A.H. Sheikh and B.N. Singh, An improved higher order zigzag theory for the static analysis of laminated sandwich plate with soft core, Finite Elements in Analysis and design, Elsevier, Vol. 44(9-10), 602-607, 2008.

    70.   M.K. Pandit, A.H. Sheikh and B.N. Singh, Vibration characteristic of laminated plates with soft core based on an improved higher-order zigzag theory, Journal of Mechanical Engineering Sciences, Proceedings of the Institution of Mechanical Engineers - UK, Vol. 22(8), 1443-1452, 2008.

    71.   M.K. Pandit, B.N. Singh and A.H. Sheikh, Buckling of laminated sandwich plates with soft core based on an improved higher order zigzag theory, Thin-Walled Structures, Elsevier, Vol. 46(11), 1183-1191, 2008.

    72.   A.H. Sheikh, P.H. Bull and J.A. Kepler, Behaviour of multiple composite plates subjected to ballistic impact, Composite Science and Technology, Elsevier, Vol. 69(6), 704-710, 2009.

    73.   M.C. Manna, A.H. Sheikh and R. Bhattacharyya, Static analysis of rubber components with piezoelectric patches using nonlinear finite element, Smart Structures and Systems, Techno Press, Vol. 5(1), 23-42, 2009.

    74.   M.K. Pandit, B.N. Singh and A.H. Sheikh, Buckling of sandwich plates with random material properties using improved plate model, American Institute of Aeronautics and Astronautics Journal, Vol. 47(2), 418-428, 2009.

    75.   M.K. Pandit, B.N. Singh, and A.H. Sheikh, Stochastic perturbation based finite element for deflection statistics of soft core sandwich plate with random material properties, International Journal of Mechanical Sciences, Vol. 51, No. 5, pp. 363-371, 2009.

    76.   A. Chakrabarti and A. H. Sheikh, Vibration and buckling of sandwich laminates having interfacial imperfections, Journal of Sandwich Structures and Materials, Vol. 11, No. 4, pp. 313-328, 2009. 

    77.   S.N. Patel, P.K. Datta and A.H. Sheikh, Dynamic stability analysis of stiffened shell panels with cut-outs, Journal of Applied Mechanics, ASME, Vol. 76, No. 4, pp. 1-13, 2009.

    78.   S.N. Patel, P.K. Datta, and A.H. Sheikh, Parametric Study on the Dynamic Instability Behaviour of laminated Composite Stiffened Plate, Journal of Engineering Mechanics, ASCE, Vol. 135 No. 11, pp. 1331-1341, 2009.

    79.   M.K. Pandit, A.H. Sheikh and B.N. Singh, Analysis of Laminated Sandwich Plates Based on an Improved Higher Order ZigZag Theory, Journal of Sandwich Structures and Materials, Vol. 12, No. 3, pp. 307-326, 2010.

    80.   M.K. Pandit, B.N. Singh and A.H. Sheikh, Stochastic Free Vibration Response of Soft Core Sandwich Plates using an Improved Higher Order Zig-Zag Theory, Journal of Aerospace Engineering, ASCE, Vol. 23 No. 1, pp. 14-23, 2010. 

    81.   A. Chakrabarti, and A.H. Sheikh, Dynamic instability of composite and sandwich laminates with interface slips, International Journal of Structural Stability and Dynamics, Vol. 10 No. 2, pp. 205-224, 2010.

    82.   M.C. Manna, R. Bhattacharyya and A.H. Sheikh, Nonlinear dynamic response and its control of rubber components with piezoelectric patches/layers using finite element method, Smart Structures and Systems, Techno Press, Vol. 6(8), 889-903, 2010.

    83.   M.K. Pandit, B.N. Singh and A.H. Sheikh, Vibration of Sandwich Plates with Random Material Properties using Improved Higher-Order Zig-Zag Theory, Mechanics of Advanced Materials and Structures, Vol. 17 No. 7, pp. 561-572, 2010.

    84.    S.N. Patel, P.K. Datta, and A.H. Sheikh, Effect of harmonic in-plane edge loading on dynamic stability of stiffened shell panels with cutouts, International Journal of Applied Mechanics, Vol. 2 No. 4, pp. 759-785, 2010.

    85.   A. Chakrabarti and A.H. Sheikh, Dynamic Instability of Imperfect Laminated Sandwich Plates with In-Plane Partial Edge Load. Latin American Journal of Solids and Structures, Vol. 7 No. 4, pp. 457-474, 2010.

    86.   A. Chakrabarti, H.D. Chalak, I.M. Ashraf and A.H. Sheikh, A new FE model based on higher order zigzag theory for the analysis of laminated sandwich beam with soft core. Composite Structures, Vol. 93 No. 2, pp. 271-279, 2011.

    87.   S. Haldar and A.H. Sheikh, Bending analysis of composite folded plates by finite element method, Finite Element in Analysis and Design, Vol. 47, No. 4, pp. 477-485, 2011.

    88.   R. Muhamad, M.S. Mohamed Ali, D. Oehlers and A.H. Sheikh, Load-slip relationship of tension reinforcement in reinforced concrete members, Engineering Structures, Vol. 33, No. 4, pp. 1098-1106, 2011.

    89.   A. Chakrabarti, A. H. Sheikh, M. Griffith and D. J. Oehlers, Analysis of composite beams with partial shear interactions using a higher order beam theory. Engineering Structures, Vol. 36, No. 1, 283-291, 2012.

    90.   A. Chakrabarti, A. H. Sheikh, M. Griffith and D. J. Oehlers, Analysis of composite beams with longitudinal and transverse partial interactions using higher order beam theory. International Journal of Mechanical Sciences, Vol. 59, No. 1, 115-125, 2012.

    91.   A. Chakrabarti, H.D. Chalak, M.A. Iqbal and A.H. Sheikh, Buckling analysis of laminated sandwich beam with soft core. Latin American Journal of Solids and Structures, Vol. 9, No. 3, 367-382, 2012. 

    92.   H.D. Chalak, A. Chakrabarti, and M.A. Iqbal and A.H. Sheikh, Vibration of laminated sandwich beams with soft core. Journal of Vibration and Control, Vol. 18, No. 10, 1422-1435, 2012.

    93.   H.D. Chalak, A. Chakrabarti, M.A. Iqbal and A.H. Sheikh, An improved C0 FE model for the analysis of laminated sandwich plate with soft core. Finite Elements in Analysis and Design, Vol. 56, September, 20-31, 2012. 

    94.   A. Chakrabarti, A. H. Sheikh, M. Griffith and D. J. Oehlers, Vibration and Buckling of composite beams with partial shear interactions using a higher order beam theory. International Journal of Structural and Civil Engineering Research, Vol. 1, No. 1, 24-42, 2012.

    95.   C. Wu and H. Sheikh, A finite element modeling to investigate the mitigation of blast effects on reinforced concrete panel using foam cladding, International Journal of Impact Engineering, Vol. 44, May, pp. 24-33, 2013.

    96.   A. Chakrabarti, A. H. Sheikh, M. Griffith and D. J. Oehlers, Dynamic response of composite beams with partial shear interaction using a higher-order beam theory, Journal of Structural Engineering, ASCE, Vol. 139, No. 1, pp. 47-56, 2013.

    97.   H.D. Chalak, A. Chakrabarti, M.A. Iqbal and A.H. Sheikh, Free vibration analysis of laminated soft core sandwich plates. Journal of Vibration and Acoustics, Transaction of the ASME, Vol. 135, No. 1, pp. 1-15, 2013.

    98.   G. Taj, A. Chakrabarti and A.H. Sheikh, Analysis of functionally graded plates using higher order shear deformation theory. Applied Mathematical Modelling, Accepted for publication Vol. 37, No. 18/19, pp. 8484-8494, 2013.

    99.   H.D. Chalak, A. Chakrabarti, A.H. Sheikh and M.A. Iqbal, C0 FE model based on HOZT for the analysis of laminated soft core skew sandwich plates: bending and vibration. Applied Mathematical Modelling, Vol. 38, No. 4, pp. 1211-1223, 2014.

    100. P. Dey, A.H. Sheikh and D. Sengupta, A new element for the analysis of composite plates. Finite Element in Analysis and Design, Accepted for publication, Vol. 82, pp. 62-71, 2014.

    101. Hamid Sheikh and Liang Huang, An efficient finite element modeling of composite stiffened shells, Applied Mechanics and Materials, Vol. 553, pp. 673-678, 2014.

    102. L. Huang, A.H. Sheikh, C.T. Ng and M.C. Griffith, An efficient finite element model for buckling of grid stiffened laminated composite plates, Composite Structures, Vol. 122, pp. 41-50, 2015.

    103. S.J. Fatemi, A.H. Sheikh and M.S. Mohamed Ali, Development and application of an analytical model for horizontally curved bridge decks, Advances in Structural Engineering, Vol. 18, No. 1, 107-118, 2015.

      

     

The information in this directory is provided to support the academic, administrative and business activities of the University of Adelaide. To facilitate these activities, entries in the University Phone Directory are not limited to University employees. The use of information provided here for any other purpose, including the sending of unsolicited commercial material via email or any other electronic format, is strictly prohibited. The University reserves the right to recover all costs incurred in the event of breach of this policy.

Entry last updated: Monday, 18 Dec 2017

To link to this page, please use the following URL:  https://www.adelaide.edu.au/directory/abdul.sheikh