MECH ENG 7030 - Advanced Vibrations
North Terrace Campus - Semester 1 - 2017
General Course Information
Course Code MECH ENG 7030 Course Advanced Vibrations Coordinating Unit School of Mechanical Engineering Term Semester 1 Level Postgraduate Coursework Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Assumed Knowledge MECH ENG 3028, in particular an understanding of the principles of vibrations, including the influence of mass, stiffness and damping; an understanding of the concepts of vibration modes and natural frequencies; and familiarity with Matlab. Course Description Students will be introduced to advanced multi-degree of freedom system analysis techniques for vibroacoustic systems, including modal analysis, statistical energy analysis and finite element analysis. Introduction to mechanical signature analysis; vibration measurement and instrumentation; signal processing and analysis; filtering; frequency domain analysis; vibration monitoring; introduction to condition monitoring and fault diagnosis.
Course Coordinator: Dr Mergen Ghayesh
The full timetable of all activities for this course can be accessed from Course Planner.
Course Learning OutcomesOn successful completion of this course students will be able to:
1 Have an in-depth understanding of the principles of vibrations; 2 Understand the concepts of vibration modes and natural frequencies and their measurement and estimation for multi-degree-of-freedom systems; 3 Have an in-depth understanding of System Modelling via use of Energy Analysis and its application to complex vibrating systems; 4 Have an understanding of vibration analysis concepts and experimental techniques including modal analysis; 5 Be familiar with the use of different numerical techniques and its application to vibration design; 6 Understand the fundamentals of flow-induced vibrations; 7 Understand the behaviour of a mechanical system, by analysing nonlinearities in vibration behaviour; 8 Be able to analyse the vibration behaviour of Micro-Electro-Mechanical Systems (MEMS) for performance enhancement purposes 9 Understand the fundamentals of vibrations of continuous systems such as beams and plates 10 Ability to critically review the literature including patents and synthesise the information with calculations to assess the feasibility of technology concepts.
The above course learning outcomes are aligned with the Engineers Australia Stage 1 Competency Standard for the Professional Engineer.
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 2.1 2.2 3.2 3.3 3.4 3.5 3.6
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1-10 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
1-10 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
10 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
Course notes – these are essential and required.
1. Inman, Daniel J., Engineering Vibration, Prentice Hall, Second Edition, 2001.
2. Leonard Meirovitch, Fundamentals of Vibrations, McGrawHill, (any edition)
3. Jon J. Thomsen, Vibrations and Stability, Springer, Second Edition, 2003
4. Mohammad I. Younis, MEMS Linear and Nonlinear Statics and Dynamics, Springer, First Edition, 2010
5. Ewins, D.J., Modal Testing: Theory, Practice and Application, Second Edition, Research Studies Press, 2000.
Lectures complemented by online resources available on MyUni, including lecture recordings.
Learning & Teaching Activities
Learning & Teaching Modes
Lectures supported by problem-solving tutorials and practicals developing material covered in lectures.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
The required time commitment is 48 hours attendance at lectures, 48 hours of revising course material and project, 48 hours completing assignments, 6 hours of laboratory classes, and 12 hours preparing and completing practical reports.
Learning Activities Summary
modal analysis (5 lectures + 1 tutorial)
system modelling via use of energy analysis (9 lectures + 1 tutorial)
use of vibration and principles of design of vibration equipment (1 lecture)
flow-induced vibrations; frequency domain analysis; and vibration behaviour of Micro-Electro-Mechanical Systems (MEMS)(14 lectures + 2 tutorials)
vibrations of continuous systems such as beams and plates (2 lectures)
numerical techniques in vibration analysis (5 lectures)
course project regarding application of a technology relating to Advanced Vibrations (equivalent to 8 lectures)
Specific Course Requirements
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Cours Project(s) 25 Individual/Group Formative/Summative Weeks 12 1. 2. 4. 5. 6. 7. 9. 10. Open book final exam 60 Individual Summative Week 15 Min 40% 1. 2. 3. 6. 7. 8. 9. Assignment 15 Individual Formative Weeks 6 1. 2. 3. 4. 5. 8. 9. 10. Total 100
This assessment breakdown complies with the University's Assessment for Coursework Programs Policy.
This course has a hurdle requirement. Meeting the specified hurdle criteria is a requirement for passing the course.
Assessment Related Requirements
Note that the laboratory experiment is compulsory and it is a requirement to pass the laboratory experiment to pass the course.
No information currently available.
All assignments must be submitted as instructed, either in the digital drop box in MyUni or as a hard copy placed in the labelled box adjacent on level 2, Engineering South. Any assignments submitted as a hard copy must be accompanied by an assessment cover sheet available on shelf beside submission box. Late assignments will be penalised 10% per day. Extensions for assignments will only be given in exceptional circumstances and a case for this with supporting documentation can be made in writing after a lecture or via email to the lecturer. Hard copy assignments will be assessed and returned in 3 weeks of the due date. There will be no opportunities for re-submission of work of unacceptable standard. Due to the large size of the class feedback on assignments will be limited to in-class discussion resulting from questions from students.
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
- Academic Support with Maths
- Academic Support with writing and speaking skills
- Student Life Counselling Support - Personal counselling for issues affecting study
- International Student Support
- AUU Student Care - Advocacy, confidential counselling, welfare support and advice
- Students with a Disability - Alternative academic arrangements
- Reasonable Adjustments to Teaching & Assessment for Students with a Disability Policy
- LinkedIn Learning
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangement Policy
- Academic Honesty Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.