ELEC ENG 3024 - Project Management for Electrical Engineering
North Terrace Campus - Semester 2 - 2016
General Course Information
Course Code ELEC ENG 3024 Course Project Management for Electrical Engineering Coordinating Unit School of Electrical & Electronic Engineering Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 5 hours per week Available for Study Abroad and Exchange Y Assumed Knowledge ELEC ENG 2007, ELEC ENG 2008, ELEC ENG 2009 Course Description Teamwork; Project lifecycle; Project planning; Project monitoring and evaluation; Completion of a team project in electrical engineering involving teamwork, problem solving and use of project management and engineering skills.
Course Coordinator: Dr Cheng-Chew LimEmail: firstname.lastname@example.org
The full timetable of all activities for this course can be accessed from Course Planner.
Course Learning Outcomes
Upon successful completion of this course students will be able to:
1. Explain engineering project phases and product lifecycle in the context of project management;
2. Explain project characteristics, team dynamics, project-scheduling models, basic principles of project cost analysis and risk
3. Apply basic project management skills to project initiation, planning, managing time and resources, execution, monitoring and
control of progress, and managing changes;
4. Apply professional skills in hands-on team projects including forming a project team, developing and executing product test plans, conducting project meetings, reporting progress, preparing documents, presenting deliverables, and undertaking project
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1-4 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
1-4 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
1-4 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
1-4 Intercultural and ethical competency
- adept at operating in other cultures
- comfortable with different nationalities and social contexts
- Able to determine and contribute to desirable social outcomes
- demonstrated by study abroad or with an understanding of indigenous knowledges
2-4 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
Required ResourcesThere are no required resources; lecture notes will be available on the MyUni website.
Recommended ResourcesSmith, Karl A.: Teamwork and Project Management, 2nd Ed, McGraw Hill, 2004.
Hughes, B. and Cotterell, M.: Software Project Management, 3rd Ed, McGraw Hill, 2002.
Extensive use will be made of the MyUni web site for this course, https://myuni.adelaide.edu.au/webapps/login
Course notes, tutorial problems, project requirements, course schedule, group list and a practice exam will all be available for downloading from the web site.
Tutorial solutions will NOT be available online
Where the lecture theatre facilities permit, audio or video recordings of lectures will also be available for downloading.
Learning & Teaching Activities
Learning & Teaching Modes
This course relies on lectures as the primary delivery mechanism for the material.
Tutorials supplement the lectures by providing exercises and example problems to enhance the understanding obtained through lectures.
Practicals are used to provide hands-on experience for students to reinforce the theoretical concepts encountered in lectures.
Continuous assessment activities provide the formative assessment opportunities for students to gauge their progress and understanding.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
Activity Quantity Contact Hours Workload hours Lecture 10 10 20 Tutorial 5 5 10 Practicals 12 36 108 Group Reports 3 0 15 Total 153
Learning Activities Summary
Lecture Topic 1 General Project Management 2 Teamwork 3 Project Life Cycle 4 Project Planning WBS 5 Network Analysis 6 Gantt Chart 7 Earned Value Analysis 8 Closeout 9 System Development Lifecycle 10 Implementation, Integration and Test
Note that practical classes begin in week 1 of the semester. Students shall attend the first practical class when further instructions on the operation of the laboratory session will be provided. if any student cannot attend this session please contact Dr Cheng-Chew Lim email@example.com for alternative arrangements.
The practical in this course involves the design and development of software to program a robot to traverse a set path. This will involve the detailed understanding of robot circuit schematics and component data sheets to determine how to control the robot.
Specific Course RequirementsNot applicable
Small Group Discovery ExperienceStudents will form into groups of 4 members and work on document generation (Project Plan, Software Design and Test Document, Final Report) and develop the software code to control the robot, and present their solution for assessment in week 12.
The group will have to undertake various research tasks such as learning the C Programming Language, how to read circuit schematics, how various Integrated Circuits used in the robot are applied and controlled and research the use and application of various project management tools, such as Microsoft Project (or equivalent) and the developement of a Software Design Document and Test Plan. This work forms 45% of the assessment.
The remaining 55% consists of 15% performance (meeting deadlines and participation in class sessions) and 40% for the final examination
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Activity Type Group or Individual Assessment Weighting Due Date Learning Objective addressed Reports (3) Formative Group 30% Weeks 4, 8 & 12 All Project Execution Formative Individual 15% All Weeks All Project Delivery Summative Group 15% Week 12 All Exam Summative Individual 40% End of Semester All
Assessment Related RequirementsThe examination is a hurdle requirement. It is necessary to achieve at least 40% in the exam. If this is not achieved, the total course mark will be limited to a maximum of 49.
A hurdle requirement is defined by the University's Assessment for Coursework Programs policy as "...an assessment task mandating a minimum level of performance as a condition of passing the course.
If a student fails to meet a hurdle requirement (normally no less than 40%),and is assigned a total mark for the course in the range of 45-49, then the student is entitled to an offer of additional assessment of some type. The type of assessment is to be decided by the School Assessment Review Committee when determining final results. The student’s final total mark will be entered at no more than 49% and the offer of an additional assessment will be specified eg. US01. Once the additional assessment has been completed, this mark will be included in the calculation of the total mark for the course and the better of the two results will apply. Note however that the maximum final result for a course in which a student has sat an additional assessment will be a “50 Pass”.
If a student is unable to meet a hurdle requirement related to an assessment piece (may be throughout semester or at semester’s end) due to medical or compassionate circumstances beyond their control, then the student is entitled to an offer of replacement assessment of some type. An interim result of RP will be entered for the student, and the student will be notified of the offer of a replacement assessment. Once the replacement assessment has been completed, the result of that assessment will be included in the calculation of the total mark for the course.
Assessment DetailAssessment details of the three (3) reports will be provided during the semester.
The Project Execution will be determined by the timely submission of management documents (timesheets, agendas and minutes) and the individual performance in client meetings (Weeks 2,4,6, 8 and 10).
Project deliveries will be determined by the performance of the end products according to specified requirements which will be provided at the start of the semester, and the collective knowledge of students about their group’s solution.
The examination will be on material presented in lectures and/or derived from tutorials.
SubmissionAll written submissions (3 reports) to be submitted as follows::
(1) One student from each group is to upload an electronic copy of EACH submissions (i.e. the 3 reports) to the MyUni website.(2) One student from each group is to email the electronic copy of EACH submisisons (i.e. 3 reports) to: firstname.lastname@example.orgLate submissions (hardcopy and/or electronic) will be accepted but with a penalty applied.
The final project code will need to be uploaded during the practical in week 12.
Weekly timesheets, fortnightly agendas and minutes will need to be uploaded, prior to the specified deadline, to the MyUni website. Late submissions will NOT be accepted.
Full details can be found at the School policies website:
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.The course was first offered in 2004 and a course or teacher SELT has been conducted each year from 2005 to 2013.
SELT feedback has suggested
· More Student Participation
· More Stimulation of Interest
· More examples of projects
· More involvement with students
· More Tutorials
· Speak Slowly
· More Explanations
· Tutorial Solutions
· Better Summary of Terms
· More consultations about the project (?)
· More accessibility
· Participation during client meetings
· Add Table of Contents for lecture material
· Provide sample reports
· More feedback
· More independent learning
· Different Projects, maybe some hardware based, other software based
· Remove Project B
· Relax rules
After SELT feedback each year the course has been modified as follows
· More examples of projects
· Lecturer to attend more practicals & tutorials
· 5 tutorial now assigned rather than 3/4 previously
· Lecturer tries to speak slowly
· More Explanations and detail of worked examples in tutorials
· A Request for tutorial solutions denied but if ANYONE cannot attend ANY tutorial (one or more) the lecturer is available to provide private guidance
· Summary of Terms provided in L10 (must knows!)
· Lecturer ALWAYS respond to emails
· Lecturer monitor relevant MyUni discussion boards
· Lecturer is available for private consultations at any time during the semester, e.g. after lectures
· Table of Contents added to lecture material
· Reports templates are provided
· Project has more independent learning
· Project B no longer included in the course
· Better to learn rules in industry now, rather than wait until after graduation
- Academic Support with Maths
- Academic Support with writing and speaking skills
- Student Life Counselling Support - Personal counselling for issues affecting study
- International Student Support
- AUU Student Care - Advocacy, confidential counselling, welfare support and advice
- Students with a Disability - Alternative academic arrangements
- Reasonable Adjustments to Teaching & Assessment for Students with a Disability Policy
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangement Policy
- Academic Honesty Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.