ELEC ENG 7049 - Power Electronics Systems

North Terrace Campus - Semester 2 - 2019

Characteristics of power electronic devices, switching characteristics of devices, power losses and thermal design. Classes of power converters and their operations: rectifiers; AC -AC Converters; DC-DC Converters; Inverters. Voltage and current source converters. Hard and soft-switching and resonant circuits. Power supplies (uninterruptible, switchmode) Advanced energy-efficient motor drives: review of motor theory, power electronic control principles, vector and servo drives (stepper, DC, induction, brushless PM and switched-reluctance). Modulation methods. Theory motor and drive selection and application. System design, implementation and control, and computer interfacing. EMI in Power Electronics Systems.

  • General Course Information
    Course Details
    Course Code ELEC ENG 7049
    Course Power Electronics Systems
    Coordinating Unit School of Electrical & Electronic Engineering
    Term Semester 2
    Level Postgraduate Coursework
    Location/s North Terrace Campus
    Units 3
    Contact Up to 2 hours per week
    Available for Study Abroad and Exchange Y
    Incompatible ELEC ENG 4059, ELEC ENG 3104
    Assumed Knowledge Undergraduate courses in electronic circuits and devices.
    Assessment Exam, quizzes
    Course Staff

    Course Coordinator: Associate Professor Nesimi Ertugrul

    Course Coordinator and Lecturer: Assoc. Prof Nesimi Ertugrul
    Email: nesimi.ertugrul@adelaide.edu.au
    Phone: 8313 5465
    Office: IW 3.54
    Course Timetable

    The full timetable of all activities for this course can be accessed from Course Planner.

    The detailed time table will also be made available during the first lecture to accomodate variations.
  • Learning Outcomes
    Course Learning Outcomes
    On successful completion of this course students will be able to:

     
    1 Recognise the components of power electronics and learn their key characteristics.
    2 Recognise the basic operation, losses and efficiency of the power electronics converters.
    3 Use various methods to analyse power electronics circuits.
    4 Develop a good insight about the practical issues in power electronics circuit design.
    5 Explain and demonstrate operational issues and limitations of practical converters in industrial applications.
    6 Explain the application requirements of converters in given applications.

     
    The above course learning outcomes are aligned with the Engineers Australia Stage 1 Competency Standard for the Professional Engineer.
    The course is designed to develop the following Elements of Competency: 1.1   1.2   1.3   1.4   1.5   1.6   2.1   2.2   3.3   3.5   

    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)
    Deep discipline knowledge
    • informed and infused by cutting edge research, scaffolded throughout their program of studies
    • acquired from personal interaction with research active educators, from year 1
    • accredited or validated against national or international standards (for relevant programs)
    1-6
    Critical thinking and problem solving
    • steeped in research methods and rigor
    • based on empirical evidence and the scientific approach to knowledge development
    • demonstrated through appropriate and relevant assessment
    3-6
    Career and leadership readiness
    • technology savvy
    • professional and, where relevant, fully accredited
    • forward thinking and well informed
    • tested and validated by work based experiences
    3
  • Learning Resources
    Required Resources
    A set of course notes, supporting materials for assignments will be available for downloading from the course web site.
    Recommended Resources
    There are no further recommended resources.
    Online Learning
    Extensive use will be made of the MyUni web site for this course, https://myuni.adelaide.edu.au/webapps/login .

    Course notes, tutorial problems and solutions and practice problems will all be available for downloading from the web site.

    Where the lecture theatre facilities permit, audio or video recordings of lectures will also be available for downloading.
  • Learning & Teaching Activities
    Learning & Teaching Modes
    This course primarily relies on lectures as the primary delivery mechanism.

    Tutorials supplement the lectures by providing exercises and computer aided simulations to enhance the understanding.

    Tutorials will be delivered to review the previous material and to provide a problem based learning activity. In addition, continuous assessment activities provide the formative assessment opportunities for students to gauge their progress and understanding.
    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    Activity Contact Hours Workload hours
    Lecture + Review + Tutorial 23 lectures + 2 Review + 7 Tuts 32 96
    In-class quizzes 2 2 16
    TOTALS 34 112
    Learning Activities Summary
    Students will be notified at the begining of the lectures about the specific session(s) in each week.

    Activity Sessions Week Topic
    Lecture 1-2 Introduction, power
    electronics definition, covarage, history and applications
    3-4 Power Electronics Devices and their charactersitics, losses
    5 Thermal design of power electronics circuits, protection, sesnsors and isolation devices
    6-8 Converter topologies and operating modes
    Review Power Electronics definitions
    9 AC coppers and cycloconverters
    10-12 DC/DC converters: Buck and Boost converters
    and two and four quadrant operation
    Review Dynamic behaviour of R,C, and L
    13-14 Inverters: single and three phase
    15-16 Switch mode power suppilies
    17 Motor Control principles and servo drives,
    open-loop and closed loop control
    Feedback devices
    18-19 DC motor control
    20 Stepper motors' control
    21 Brushless Permanent Magnet motors and their control
    22-23 Induction motor and switched reluctance motor control
    Tutorial 1 2 Sample questions
    2 3 Sample questions
    3 5 Sample questions
    4 6 Sample questions
    5 8 Sample questions
    6 9 Sample questions
    Quiz 1 4
    2 7


    Specific Course Requirements
    Not applicable
    Small Group Discovery Experience
    Not applicable.
  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary
    Assessment Task Weighting (%) Individual/ Group Formative/ Summative
    Due (week)*
    Hurdle criteria Learning outcomes
    Quiz 1 25 Individual Summative Week 6 1. 2. 3. 4. 5. 6.
    Quiz 2 25 Individual Summative Week 12 1. 2. 3. 4. 5. 6.
    Final examination 50 Individual Summative End of semester 1. 2. 3. 4. 5. 6.
    Total 100
    * The specific due date for each assessment task will be available on MyUni.
     
    This assessment breakdown is registered as an exemption to the University's Assessment for Coursework Programs Policy. The exemption is related to the Procedures clause(s): 1. a. i    1. a. ii    1. a. iii    1. b. 3.    1. c.   
     
    Assessment Detail

    No information currently available.

    Submission

    No information currently available.

    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through Access Adelaide.

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.

The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.