PHYSICS 1008 - Physical Aspects of Nature I
North Terrace Campus - Semester 1 - 2021
General Course Information
Course Code PHYSICS 1008 Course Physical Aspects of Nature I Coordinating Unit School of Physical Sciences Term Semester 1 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 7 hours per week Available for Study Abroad and Exchange Y Incompatible PHYSICS 1100 & PHYSICS 1101 Restrictions Available to students without SACE Stage 2 Physics or with a Subject Achievement grade of less than B- or equivalent and without SACE Stage 2 Mathematical Methods Course Description This course provides an introduction to some of the principles of physics and their applications in agricultural and biological sciences. It is intended for students who have not studied SACE Stage 2 Physics, and who require familiarity with Physics principles and applications in their other studies. The course introduces concepts of force, energy, thermal physics, fluids and DC electricity, introduction to practical problem solving.
Students who achieve a grade of Credit or better in this course and have completed SACE Stage 2 Mathematical Studies (or equiv.) may enrol in the semester 2 course PHYSICS 1201 Physics for the Life and Earth Sciences IB.
Course Coordinator: Associate Professor Andrew MacKinnon
The full timetable of all activities for this course can be accessed from Course Planner.
Course Learning OutcomesA successful student should be able to:
1 demonstrate a working knowledge of the physical principles that describe mechanics, fluids, electricity and thermal physics; 2 make qualitative and semi-quantitative predictions about the behaviour of the aforementioned systems; 3 identify aspects of nature which can be understood using physical principles; 4 apply an understanding of physical principals to familiar and unfamiliar situations in nature; 5 make appropriate use of standard measurement and data analysis techniques; 6 draw non-trivial conclusions from experimental results; 7 work cooperatively in a team to complete a task in a limited time 8 confidently communicate results about the physical world both orally and in writing
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1-6 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
2-6 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
7-8 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
Required ResourcesUrone, P. and Hinrichs, R. (2013) College Physics (OpenStax College)
This is a free open-source textbook that can be downloaded as a pdf, epub or viewed directly on the web from http://openstaxcollege.org/textbooks/college-physics/
Giancoli, D. C. (2005) Physics Principles with Applications, 6th ed. (Pearsons/Prentice Hall)
- Kirkup, L. (1994) Experimental Methods, (Wiley)
- OpenStax textbook home page: http://openstaxcollege.org/textbooks/college-physics/
- Giancoli textbook home page: http://www.prenhall.com/giancoli/
- School home page: http://www.chemphys.adelaide.edu.au/
MyUni: Teaching materials and course documentation will be posted on the MyUni website (http://myuni.adelaide.edu.au/).
Learning & Teaching Activities
Learning & Teaching Modes
This course will be delivered by the following means:
- 3 lectures of 1 hour per week
- 1 tutorial of 1 hour per week
- 1 practical of 3 hours per fortnight
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
A student enrolled in a 3 unit course, such as this, should expect to spend, on average 12 hours per week on the studies required. This includes both the formal contact time required to the course (e.g., lectures and practicals), as well as non-contact time (e.g., reading and revision).
Learning Activities Summary
The course content will include the following:
- Random and systematic uncertainties in measurements
- Kinematics overview: motion diagrams for linear motion; graphical representation of linear motion; representing motion in two dimensions
- Dynamics overview: force and Newton's laws of motion; some everyday forces; isolating the system of interest; constructing force diagrams.
- Vectors - adding, subtracting, resolving.
- Dynamics applications: linear motion of a simple object with constant acceleration; linear motion of connected objects with constant acceleration; circular motion with constant speed; projectile motion.
- Rotational motion and statics: centre of mass; torque; conditions for equilibrium; levers in the human body; applications of statics.
- Mechanics of solids: elasticity, stress and strain; loading and fracture.
- Work, heat and energy: transformation and transfer of energy; kinetic and potential energy; work, power, efficiency and metabolic rate; conservative and dissipative forces; collisions.
- Applications of mechanics (e.g. skeletal structure and animal/human movement)
- Fluid statics: definition of a fluid; density and specific gravity; pressure (atmospheric, gauge, absolute); Pascal's principle; buoyancy; Archimedes' principle; floating objects.
- Fluid dynamics: streamlines; turbulence; continuity; Bernoulli principle and its applications; viscosity; Newtonian fluids; Poiseuille's equation; surface tension; cohesion; adhesion; wetting; capillarity; Laplace's law;
- Applications of fluids (e.g. wine in pipes, blood flow, blood pressure).
Thermal Concepts (16%)
- Atomic theory of matter: Brownian motion; phases of matter.
- Temperature: thermometers and temperature scales; constant volume gas; thermal equilibrium; thermal expansion; thermal stress.
- Gas laws: equation of state; Boyle's law; Charles's law; Gay-Lussac's law; ideal gas law; the mole and Avogadro's number.
- Kinetic theory: Maxwell distributions; real gases; phase diagrams; evaporative cooling; vapour pressure; boiling; partial pressure; relative humidity; diffusion.
- Heat, work, and energy: internal energy; temperature; heat capacity and specific heat; latent heat of fusion and vaporization; heat transfer by conduction, convection and radiation.
- Applications of thermal concepts (e.g. climate change, diffusion of gases in biological systems)
- Electrostatics: electric charge; polar molecules; conductors and insulators; the electric field.
- Electric potential: potential and potential energy; batteries; capacitors; dielectrics; storage of electric energy.
- Electric currents: electric cells; batteries; current; Ohm's law; resistance; resistivity; electric shock; electric power in resistors; fuses and circuit breakers; alternating current (AC); RMS voltage; RMS power.
- DC circuits: circuit symbols; resistors in a circuit; conservation of charge; resistors in series and in parallel; current through circuits; equivalent resistances; emf and internal resistance; capacitors in a circuit; RC Circuits; AC Circuits; Kirchhoff's rules.
- Applications of electricity (e.g. nerve transmission, electrical safety)
Practical Work Content
Computer based experiment, carried out individually:
- Reaction time
Experiments carried out in groups of three students:
- Conservation of energy
- Fluid flow
- Voltage divider
Specific Course Requirements
A Science Notebook, consisting of alternating lined and graph pages is required for the practicals. A 64 page book should be adequate.
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Due to the current COVID-19 situation modified arrangements have been made to assessments to facilitate remote learning and teaching. Assessment task Type of assessment Percentage of total assessment Hurdle
Yes or No #
Outcomes being assessed/achieved Workshop preparation and participation Formative & Summative 10% No 1 - 4, 7 - 8 Practical work Formative & Summative 20% Yes
(30% in each practical and 40% overall)
1 – 8 In – Semester Tests Formative & Summative 10% No 1 - 4, 8 Written Examination Summative 60% No 1 - 4, 8
Assessment Related Requirements
To obtain a grade of Pass or better in this course, a student must total 50% and also achieve a result of at least 30% in each practical and an overall result of 40% for the practical component.
Workshop preparation and participation (10% of the total course grade)
Workshops are held weekly, starting in the second week. The grade for the workshop is based on the student’s preparation and participation during the workshop. Poor workshopl results can be partly replaced by a better performance in the final exam.
Practical work (20% of the total course grade)
All Practicals/experiments are compulsory and contribute equally to the practical component of the grade. For each laboratory practical, the student must obtain a satisfactory result in the preparatory work, attend the practical session and submit the logbook for assessment. A practical catch-up session is held at the end of the teaching semester to allow students to catch up any missed practicals.
In – Semester Tests (10% of the total course grade)
Up to 5 tests will occur throughout the semester. Poor results in the tests can be partly replaced by a better performance in the final exam. This is achieved by varying the contribution of this task towards the total assessment to optimise the final result for each student.
Examination (60% of the total course grade)
The end-of-semester examination is based primarily on lecture/workshop material.
Submission of Assigned Work
Coversheets must be completed and attached to all submitted work. Coversheets can be obtained from the School Office (room G33 Physics) or from MyUni. Work should be submitted via the assignment drop box at the School Office.
Extensions for Assessment Tasks
Extensions of deadlines for assessment tasks may be allowed for reasonable causes. Such situations would include compassionate and medical grounds of the severity that would justify the awarding of a supplementary examination. Evidence for the grounds must be provided when an extension is requested. Students are required to apply for an extension to the Course Coordinator before the assessment task is due. Extensions will not be provided on the grounds of poor prioritising of time. The assessment extension application form can be obtained from: http://www.sciences.adelaide.edu.au/current/
Late submission of assessments
If an extension is not applied for, or not granted then a penalty for late submission will apply. A penalty of 10% of the value of the assignment for each calendar day that the assignment is late (i.e. weekends count as 2 days), up to a maximum of 50% of the available marks will be applied. This means that an assignment that is 5 days late or more without an approved extension can only receive a maximum of 50% of the marks available for that assignment.
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- International Student Support
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
- YouX Student Care - Advocacy, confidential counselling, welfare support and advice
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.