MECH ENG 7044 - Biomechanical Engineering
North Terrace Campus - Semester 2 - 2014
General Course Information
Course Code MECH ENG 7044 Course Biomechanical Engineering Coordinating Unit School of Mechanical Engineering Term Semester 2 Level Postgraduate Coursework Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Course Description This course will provide an introduction to the fundamentals of the structure and mechanics of the musculoskeletal system with application of mechanics to bone, tendon, cartilage, ligaments and other biological materials. The structure and function of the major joints in the body will be covered, such as the hip, knee and spine as well as multiple joint systems such as the shoulder, wrist and hand. Experimental and analytical methods used to understand the function of joints and artificial joints will be discussed throughout the course. At completion of this course, students will understand the concept of joint biomechanics and their function, and how artificial joints function, why they fail, as well as their limitations and emerging new technologies in the biomechanics field
Course Coordinator: Associate Professor Paul Grimshaw
The full timetable of all activities for this course can be accessed from Course Planner.
Course Learning Outcomes
1 Have a sound understanding of the general principles of joint biomechanics, and their function. 2 Have a sound understanding of the concepts and theory of viscoelasticity as it applies to soft tissues, cartilage, and bone. 3 Have a sound understanding of how artificial joints function and why they fail, as well as their limitations. 4 Be aware of emerging new technologies in the biomechanics field and appreciate the multi-disciplinary collaborative nature of biomechanics research. 5 Be able to critically review the relevant literature and identify a clinical problem, and take the first steps towards formulating a research hypothesis and designing appropriate experimental methods/analytical models to test the hypothesis.
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Knowledge and understanding of the content and techniques of a chosen discipline at advanced levels that are internationally recognised. 1-5 The ability to locate, analyse, evaluate and synthesise information from a wide variety of sources in a planned and timely manner. 5 An ability to apply effective, creative and innovative solutions, both independently and cooperatively, to current and future problems. 1-5 A commitment to continuous learning and the capacity to maintain intellectual curiosity throughout life. 4,5
Basic Orthopaedic Biomechanics and Mechano-biology, 3rd Edition by Mow VC & Huiskes R, Lippincott, Williams & Wilkins, Philadelphia, USA, 2005. ISBN: 0-7817-3933-0. Extensive notes will also be provided.
Biomechanics of the Musculo-skeletal system – 3rd edition by Benno Nigg and Walter Herzog. John Wiley & Sons Publishers. Chichester, England. 2007. ISBN 978-0-470-01767-8. Extensive notes will also be provided.
Online LearningLectures, Home work and solutions and marks will be posted on MyUni.
Learning & Teaching Activities
Learning & Teaching Modes
Lecturing will be used to convey the knowledge to the students with regular real-world examples of biomechanical challenges and solutions regularly discussed.
Combined tutorials/group work sessions will be used to reinforce the concepts covered in lectures by challenging the students with more open-ended questions designed to deepen their understanding and encourage critical thinking skills. Solutions to these questions will be discussed during tutorials. At least one session will be dedicated to conducting a critical review of a biomechanics research manuscript and formulating a hypothesis that will need to be tested during a series of practical sessions.
Practical sessions will be used to demonstrate the latest technologies employed in artificial joints, perform a mock joint replacement using artificial foam bones, measure the complex material properties of soft tissues/bone and experimentally test a hypothesis that was developed during tutorial/group work sessions.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
The required time commitment from the beginning of semester to the end of the final exam is 40 hours attendance at lectures/tutorials, 40 hours of self directed learning, 40 hours completing assignments and 40 hours of revising course material and preparing for the exam.
Learning Activities Summary
Analysis of muscle and joint Loads (10%)
Biomechanics of bone and osteoporosis (10%)
Structure and function of articular cartilage and meniscus (5%)
Viscoelasticity – intrinsic/biphasic and poroelasticity (5%)
Structure and function of ligaments and tendons (10%)
Muscle mechanics (5%)
Knee biomechanics (5%)
Hip biomechanics (10%)
Spine/disc biomechanics (20%)
Biomechanics of artificial joints: The Hip (10%)
Fracture fixation and healing (5%)
Imaging of soft tissues and joints (5%)
Review of a topical area/article in biomechanics
Specific Course Requirements
One field trip for practical sessions in the Biomechanical Materials Testing Laboratory at Flinders University will be undertaken (subject to availability)
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Task Task Type Due Weighting Learning Outcome Homework #1 Summative
Summative Week 5 5% 1,2 Preliminary Research Report Formative Week 7 - 4,5 Homework #3 Summative Week 9 5% 1,2 Practical Assignment Summative Week 10 10% 1,2,5 Homework #4 Summative Week 11 5% 1-4 Final Research Report Summative Week 12 20% 3-5 Final Exam Summative Week 15-16 50% 1-4
Assessment Related RequirementsNONE
Assessment Task Content covered Homework #1 Static & Dynamic analysis of muscle and joint loads Homework #2 Bone and Ligament & Tendon Preliminary Research Report Identify research topic and brief report on literature reviewed and report objectives Homework #3 Cartilage and Spine Practical Assignment Data analysis of experimental results, development of Matlab programming skills, discussion, limitations and interpret findings Homework #4 Hip research methods and muscle and gait analysis Final Research Report Detailed literature review of topic and development of hypotheses and design of methods, anticipated results and significance Final Exam
Submission of all homeworks/practical/reports will be via a hard copy placed in the labelled box located on level 2 of Engineering South Building and must be accompanied by an assessment cover sheet available from room S116 or near the assignment submission area.
Work submitted late attracts a penalty of 10% of the total mark per working day. Extensions for other assignments will only be given in exceptional circumstances and a case for this with supporting documentation can be made in writing after a lecture or via email to the lecturer who set the assignment.
Return of marked assignments will be within three weeks after submission deadline and feedback will be provided where appropriate on each assignment and to the whole class.
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
- Academic Support with Maths
- Academic Support with writing and speaking skills
- Student Life Counselling Support - Personal counselling for issues affecting study
- International Student Support
- AUU Student Care - Advocacy, confidential counselling, welfare support and advice
- Students with a Disability - Alternative academic arrangements
- Reasonable Adjustments to Teaching & Assessment for Students with a Disability Policy
- LinkedIn Learning
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangement Policy
- Academic Honesty Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.