MECH ENG 7045 - CFD for Engineering Applications

North Terrace Campus - Semester 1 - 2022

The course will equip the students with the necessary knowledge to use computational techniques to solve problems related to flow mechanics. In particular, students will have hands on experience in using computational fluid dynamics to solve engineering problems. Governing equations, discretisation schemes, numerical methods, turbulence modelling, mesh quality and independence test, numerical errors, and boundary conditions will be introduced in the course.

  • General Course Information
    Course Details
    Course Code MECH ENG 7045
    Course CFD for Engineering Applications
    Coordinating Unit School of Mechanical Engineering
    Term Semester 1
    Level Postgraduate Coursework
    Location/s North Terrace Campus
    Units 3
    Contact Up to 4 hours per week
    Available for Study Abroad and Exchange Y
    Assumed Knowledge MECH ENG 2021, MECH ENG 3102, MECH ENG 3101 (or equivalent courses)
    Course Description The course will equip the students with the necessary knowledge to use computational techniques to solve problems related to flow mechanics. In particular, students will have hands on experience in using computational fluid dynamics to solve engineering problems. Governing equations, discretisation schemes, numerical methods, turbulence modelling, mesh quality and independence test, numerical errors, and boundary conditions will be introduced in the course.
    Course Staff

    Course Coordinator: Dr Zhao Tian

    Course Timetable

    The full timetable of all activities for this course can be accessed from Course Planner.

  • Learning Outcomes
    Course Learning Outcomes

    At the end of this course, the student will be able to:

    1 Solve the governing equations for fluid flow
    2 Use finite difference and finite volume methods to fluid flow problems
    3 Explain how grids are generated;
    4 Explain how to assess stability and conduct a grid-convergence assessment;
    5  Apply turbulence models to engineering fluid flow problems;
    6 Apply compressible flow solvers;
    7 Explain the issues surrounding two-phase flow modelling;
    8 Solve numerically a heat transfer problem; and
    9 Ese ANSYS CFX to an acceptable standard for a graduate engineer.
    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)

    Attribute 1: Deep discipline knowledge and intellectual breadth

    Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.

    1-9

    Attribute 2: Creative and critical thinking, and problem solving

    Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.

    2-9

    Attribute 3: Teamwork and communication skills

    Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.

    9

    Attribute 4: Professionalism and leadership readiness

    Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.

    2-9

    Attribute 8: Self-awareness and emotional intelligence

    Graduates are self-aware and reflective; they are flexible and resilient and have the capacity to accept and give constructive feedback; they act with integrity and take responsibility for their actions.

    9
  • Learning Resources
    Required Resources

    Tu, J., Yeo, G.H. and Liu C. (2008), Computational Fluid Dynamics: A Practical Approach, Butterworth-Heinemann (an imprint for Elsevier).

    Recommended Resources

    Ferziger, J.H and Peric, M. (1997) Computational Methods for Fluid Dynamics, Springer-Verlag, Berlin.

    Online Learning

    This course will make heavy use of the resources placed on myUni by the Instructors. Please make sure you check the course myUni page at least weekly.

  • Learning & Teaching Activities
    Learning & Teaching Modes
    Lectures supported by tutorials and workshops in the CATSuite.
    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    In addition to the lectures and tutorials, you are expected to spend approximately 8-10 hours a week studying for this course.

    Learning Activities Summary
    Week Session 1 (2hrs) Session 2 (2 hrs)
    1 Introduction to CFD TBA
    2 Formulation of Flow Problems Flow field variables and classification of flows TBA
    3 Mesh generation and boundary conditions 1 TBA
    4 Boundary Conditions 2 and Navier-Stokes equations 1 TBA
    5 Navier-Stokes Equation 2 and Finite Difference method 1 (Blend learning) TBA
    6 Higher order schemes TBA
    7 Finite Volume and TDMA (Blend learning) TBA
    8 CFD solution analysis and validation/verification TBA
    9 Turbulence modelling (Blend learning) TBA
    10  Heat transfer and two phase flow modelling TBA
    11 Invited seminar (guest lecture) TBA
    12 Revision TBA
    Specific Course Requirements
    NONE
  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary

    Assessment Task Weighting (%) Individual/ Group Formative/ Summative
    Due (week)*
    Hurdle criteria Learning outcomes
    Written assignment (one written assignment) 5 Individual Summative week 8 or 9
    Online quizzes (x7) 10 Individual Formative Weeks 2-12
    CFD project (group project) 20 Group week 11 or 12
    Final Exam 65 Individual Exam week
    Total 100
    * The specific due date for each assessment task will be available on MyUni. 

     
    This assessment breakdown complies with the University's Assessment for Coursework Programs Policy.



    Assessment Related Requirements
    Students must achieve a mark greater than 49% to pass.
    Assessment Detail

    No information currently available.

    Submission
    Submit all assignments to the submission boxes on the 2nd floor of the Engineering South Building.
    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through Access Adelaide.

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.

The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.