MECH ENG 7063 - Advanced Topics in Aerospace Engineering

North Terrace Campus - Semester 2 - 2018

This course will provide content that will enable you to: (1) Understand and use the core theory of dynamics, acoustics, aerodynamics, turbulence and signal processing to solve real engineering problems; (2) Understand and use aeroacoustic theory for solving theoretical and practical problems; and (3) Use the theory presented in this course to solve practical flight dynamics and handling problems of aircraft.

  • General Course Information
    Course Details
    Course Code MECH ENG 7063
    Course Advanced Topics in Aerospace Engineering
    Coordinating Unit School of Mechanical Engineering
    Term Semester 2
    Level Postgraduate Coursework
    Location/s North Terrace Campus
    Units 3
    Contact Up to 4 hours per week
    Available for Study Abroad and Exchange Y
    Assumed Knowledge Fluid mechanics, aerodynamics, dynamics and control
    Assessment 5 assignments, final exam
    Course Staff

    Course Coordinator: Dr Rey Chin

    Course Timetable

    The full timetable of all activities for this course can be accessed from Course Planner.

  • Learning Outcomes
    Course Learning Outcomes
    On successful completion of this course students will be able to:

    1 Analyse the static stability of aircraft;
    2 Derive and use the rigid body equations of motion for an aircraft;
    3 Analyse the longitudinal dynamic stability of aircraft;
    4 Analyse the lateral dynamic stability of aircraft;
    5 Have a good understanding of aeroacoustics and its role in industry; be able to apply some analysis procedures to estimate aerospace system noise; and
    6 Understand and apply the principles learned during the advanced topics sections (e.g. aeroelasticity, turbulence control, etc).

    The above course learning outcomes are aligned with the Engineers Australia Stage 1 Competency Standard for the Professional Engineer.
    The course is designed to develop the following Elements of Competency: 1.1   1.2   1.3   1.4   2.1   2.2   2.3   2.4   3.2   3.3   3.4   3.5   3.6   

    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)
    Deep discipline knowledge
    • informed and infused by cutting edge research, scaffolded throughout their program of studies
    • acquired from personal interaction with research active educators, from year 1
    • accredited or validated against national or international standards (for relevant programs)
    Critical thinking and problem solving
    • steeped in research methods and rigor
    • based on empirical evidence and the scientific approach to knowledge development
    • demonstrated through appropriate and relevant assessment
    Teamwork and communication skills
    • developed from, with, and via the SGDE
    • honed through assessment and practice throughout the program of studies
    • encouraged and valued in all aspects of learning
    5, 6
    Career and leadership readiness
    • technology savvy
    • professional and, where relevant, fully accredited
    • forward thinking and well informed
    • tested and validated by work based experiences
    5, 6
    Self-awareness and emotional intelligence
    • a capacity for self-reflection and a willingness to engage in self-appraisal
    • open to objective and constructive feedback from supervisors and peers
    • able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
  • Learning Resources
    Required Resources

    Course Notes

    “Flight Stability and Automatic Control”, Robert C. Nelson. McGraw Hill Book Company, 1998 [629.13236 N429f] {and also at Unibooks}

    Recommended Resources

    “Mechanics of Flight”, Warren F. Phillips, Wiley, 2004 [629.1323 P564m]

    “Flight Mechanics”, A. Miele, Addison-Wesley Pub. Co, 1962 [629.132 M631]

    Other reading material will be given out in class or available on myUni.

  • Learning & Teaching Activities
    Learning & Teaching Modes

    Lectures supported by tutorials and workshops.


    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    In addition to the lectures and tutorials, you are expected to spend approximately 10-12 hours a week studying for this course.

    Learning Activities Summary

    Week 1: Introduction, review of background material

    Week 2:Point and distributed mass models

    Week 3: Small disturbance theory

    Week 4: Static stability

    Week 5: Longitudinal motion

    Week 6: Longitudinal and lateral motion

    Week 7: Lateral motion

    Weeks 8-12: Advanced Topics

    {Note: only a guide and may change}

  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary

    1. Assignments and other formative assessment tasks, [30%]

    2. Exam: Written, [70%]

    Assessment Detail

    Students must achieve a mark greater than 49% to pass.


    Submit all assignments to the submission boxes on the 2nd floor of the Engineering South Building or as otherwise indicated by teaching staff.

    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through Access Adelaide.

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy ( course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.

The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.