ELEC ENG 1009 - Electrical & Electronic Engineering IA
North Terrace Campus - Semester 2 - 2015
General Course Information
Course Code ELEC ENG 1009 Course Electrical & Electronic Engineering IA Coordinating Unit School of Electrical & Electronic Engineering Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 7 hours per week Available for Study Abroad and Exchange Y Course Description This course provides an introduction to electrical and electronic engineering covering: basic electric circuit quantities and circuit analysis techniques; semiconductor devices such as diodes, transistors and operational amplifiers and their application in power supplies and amplifiers; digital logic and microcontrollers; and finally electrical energy, machines and power systems. It is designed to give a broad understanding of the principles of electrical and electronic engineering.
It covers the following material:
Basic Circuits/DC Analysis: electrical quantities, components and sources, circuit analysis laws; Kirchhoff laws, series/parallel circuits, voltage/current divider, superposition, Thevenin theorem, controlled sources.
Electronics: Diodes, DC power supplies, transistors and op-amps.
Digital Electronics: Perform basic binary arithmetic calculations; analyse and synthesise combinatorial logic circuits; and analyse the operation of short assembly-language programs.
Electrical Machines: introduction to magnetic circuits, transformers and DC and AC machines. Introduction to
Digital Workshop: safety and basic skills, Design project; electronic die, power supply, oscillator, logic gates, flip-flops and counters, an electrical machines lab session.
Course Coordinator: Dr Wen SoongLectures Parts A (Circuits) and B (Electronics)
Name: Assoc. Prof. Wen Soong
Room: Ingkarni Wardli 3.53
Lectures Part C (Digital)
Name: Assoc. Prof Michael Liebelt
Room: Ingkarni Wardli 3.36
Lectures Part D (Energy)
Name: Dr. Andrew Allison
Room: Ingkarni Wardli 3.51
Practical Coordinator Part F
Name: Dr. Hong-Gunn Chew
Room: Ingkarni Wardli 3.52
The full timetable of all activities for this course can be accessed from Course Planner.
Course Learning Outcomes1. Use the appropriate SI units, prefixes and symbols as well as conventional notation and significant figures for electrical quantities.
2. Analyse simple steady-state DC circuits of resistors, current and voltage sources, capacitors and inductors.
3. Analyse simple diode, single field-effect transistor amplifier and operational amplifier circuits. Design simple DC power supplies.
4. Perform basic binary arithmetic calculations; analyse and synthesise combinatorial logic circuits; and analyse the operation of short assembly-language programs.
5. Use the principles of electrical energy conversion to analyse DC and AC electrical machines to determine their performance characteristics; analysis of sustainable energy systems such as solar, wind and thermal power generation.
6. Have experience in the practical design, construction and testing of electronic circuits.
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Knowledge and understanding of the content and techniques of a chosen discipline at advanced levels that are internationally recognised. 1-5 Skills of a high order in interpersonal understanding, teamwork and communication. 6 A proficiency in the appropriate use of contemporary technologies. 1-6 An awareness of ethical, social and cultural issues within a global context and their importance in the exercise of professional skills and responsibilities. 5
Required Resources1) The following required resources are available on MyUni:• Lecture notes: you can print these yourself, or purchase them from EEESAU (the local student branch of an electrical and electronic engineering technical society) at the beginning of the semester at reasonable cost, see signs around the Engineering North and IW building.• Online tests: these are both available and submitted on the course MyUni website.• Tutorial questions: these are available on the MyUni website in the week leading up to the tutorial.
2) A toolkit is required for the practical sessions. Bring a $70 refundable cash deposit to the first practical session. These toolkits represent $150 wholesale value. They contain prototyping boards and basic tools.
Recommended Resources1) Practice problems are available on MyUni for most of the course segments. Some of these will be used in the online tests and tutorial questions.
2) Reference Books
The course lecture notes should provide sufficient information for most students, however you may find the following reference book useful if you are have difficulty with the material or are interested in learning more about any of the topics in this course.
Copies of the book are available in the reserve collection of the Barr Smith library.• A.R. Hambley: Electrical Engineering - Principles and Applications, 6th Edition, Pearson.
Online LearningAll course announcements will be made via MyUni. They will be kept on the MyUni announcement board. In addition, important announcements will also be emailed to all course participants.
The use of the MyUni discussion boards is strongly encouraged for questions relating to course material, but also for more general discussion on electrical and electronic engineering and technology. Anonymous posts will be permitted, offensive posts will not. Lecturers will make a best effort to respond promptly to questions raised on the discussion boards.
The MyUni Gradebook will be used to return continuous assessment marks. Students should check the Gradebook regularly and confirm their marks have been correctly entered.
Video recordings of lectures will normally be made available on MyUni within one working day of the lecture. The video recordings consist of the image displayed on the digital projector. Note some lecture theatres have two digital projectors and in this case only the content displayed on one of the projectors will be available.
In addition, the following material will be provided on MyUni at the start or during the course of the semester:• lecture notes and tutorial questions• some past assessment examples (quizzes and exams)• additional exercise problems
Learning & Teaching Activities
Learning & Teaching ModesPART A. Basic Circuits and DC Analysis
PART B. Introduction to Electronics
PART C. Introduction to Digital Electronics
PART D. Introduction to Electric Energy
This material is presented in lectures and supported by problem-solving tutorials, formative online tests and optional exercise problems.
Tutorial problems should be attempted before the tutorial and this preparation is assessed at the start of each tutorial. The tutor will also go through selected questions on the board and students will be given opportunities to ask questions.
Online tests are automatically marked. Wrong answers are indicated and correct answers are provided. Students may attempt an online test as many times as they wish before its due date, but on each attempt will have to try all questions again. Some numerical values in questions may change between attempts. Students will be awarded the maximum mark from all of their attempts of a particular online test.
PART E. Application Lecture
This lecture gives a broad overview of the course material to follow in an applied context. It is not examinable.
PART F. Digital Practical Sessions
The students are given a series of self-paced practical exercises which are marked on a regular schedule.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.This is a 3 unit course. The University expects students to spend around 156 hours of work for a 3 unit course. This corresponds to roughly 12 hours per week. The following breakdown is a guide only. Some students will need to spend more time, some less.
Activity Contact Hours Non-contact Hours Number Workload hours Lecture 1 1 (prep & revise*) 32 64 Special Lectures 1 0 2 2 Tutorials 1 2.5 (prep, revise* & online test) 11 39 Practical 3 2 9 45 TOTAL 150 * This includes time spent revising for the quiz and exam.
Learning Activities SummaryPart A. Basic Circuits and DC Analysis
A.2 Electrostatics, charge and current
A.3 Potential and voltage
A.6 Voltage and current sources
A.7 Circuit analysis techniques
A.8 AC quantities, capacitors and inductors
Part B. Introduction to Electronics
B.1 Introduction to Electronics
B.3 Power Supplies
B.5 Operational Amplifiers
Part C. Introduction to Digital Electronics
C.1 About Digital Electronics
C.2 Combinatorial Logic Circuits
C.3 Introduction to Microcontrollers
C.4 The PIC 18F1320 Microcontroller
C.5 Application Example
C.6 Programming in a High Level Language
Part D. Introduction to Electric Energy
D.1 Basic Transformer and Machine Principles
D.2 Electrical Energy Systems
D.3 Machine Torque vs. Speed Characteristics
D.4 DC Machine Analysis
D.5 Introduction to AC Machines
Part E. Application Lectures
E.1 Digital Concepts: a programmable logic controller
Part F. Digital Practical Sessions
F.1 Safety and basic skills
F.2 Electronic Die Design Project: oscillator, logic gates, flip-flops and counters
F.3 Electrical machine lab
Specific Course RequirementsLaboratory clothing restrictions apply to the practical sessions: closed-toe shoes; covered shoulders; long hair must be tied back.
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Item Date Weight Type Learning Objectives Notes Examination
during exam period
60% Summative 1 to 5 2.5 hours, closed book, bring calculator, formula sheet provided Quiz
approx. mid-way during semester
10% Summative 1 to 3 40 minutes in lecture slot, formula sheet provided, covers circuits and electronics components Tutorial Preparation
5% Formative 1 to 5 Mark out of 3:
1 = attended,
2= attempted half the questions,
3 = attempted all questions
5% Formative 1 to 5 These are submitted via myUNI, they can be attempted multiple times and the best result is what is recorded. Practical Sessions
20% Summative 6 There is no opportunity to redeem a poor mark. Special arrangements may be put in place if you miss a session on medical grounds.
Assessment Related RequirementsA hurdle requirement is defined by the University's Assessment for Coursework Programs policy as "...an assessment task mandating a minimum level of performance as a condition of passing the course.
In the EEE1A course both the examination and the practical components are hurdle requirements. It is necessary to achieve at least 40% in both the exam and the practical component. If the exam hurdle requirement is not achieved, the total course mark will be limited to a maximum of 49. If the practical hurdle requirement is not met, the total course mark will be limited to a maximum of 44.
It is important to note there is NO supplementary assessment offered for the practical component after the end of Week 12. By arrangement with the Practical coordinator, it will be possible throughout the semester for students who are falling significantly behind to have supplementary opportunities. However if students persistently neglect the practical throughout semester they are likely to not meet the hurdle requirement and hence fail the course without further opportunity for redemption. Exceptions will be made in the case of verifiable medical or compassionate circumstances beyond the student’s control.
If a student fails to meet a hurdle requirement (normally no less than 40%),and is assigned a total mark for the course in the range of 45-49, then the student is entitled to an offer of additional assessment of some type. The type of assessment is to be decided by the School Assessment Review Committee when determining final results. The student’s final total mark will be entered at no more than 49% and the offer of an additional assessment will be specified e.g. US01. Once the additional assessment has been completed, this mark will be included in the calculation of the total mark for the course and the better of the two results will apply. Note however that the maximum final result for a course in which a student has sat an additional assessment will be a “50 Pass”.
If a student is unable to meet a hurdle requirement related to an assessment piece (may be throughout semester or at semester’s end) due to medical or compassionate circumstances beyond their control, then the student is entitled to an offer of replacement assessment of some type. An interim result of RP will be entered for the student, and the student will be notified of the offer of a replacement assessment. Once the replacement assessment has been completed, the result of that assessment will be included in the calculation of the total mark for the course.
Assessment DetailSee the notes for each item in the table in Section 5.1, Assessment Summary.
SubmissionAll written submissions to formative assessment activities are to be submitted electronically, or to designated boxes within the School of Electrical & Electronic Engineering, by 3.00pm on the specified date and must be accompanied by a signed cover sheet. Copies of blank cover sheets are available from the School office in Ingkarni Wardli 3.26, or online in electronic form. Late submissions are not accepted unless explicit prior approval is granted by the course coordinator or Head of School. All in-term assessments will have a two week turn-around time for provision of feedback to students.
Full details can be found on the School website:
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
- Academic Support with Maths
- Academic Support with writing and speaking skills
- Student Life Counselling Support - Personal counselling for issues affecting study
- International Student Support
- AUU Student Care - Advocacy, confidential counselling, welfare support and advice
- Students with a Disability - Alternative academic arrangements
- Reasonable Adjustments to Teaching & Assessment for Students with a Disability Policy
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangement Policy
- Academic Honesty Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.