C&ENVENG 2069 - Geotechnical Engineering IIA
North Terrace Campus - Semester 2 - 2014
General Course Information
Course Code C&ENVENG 2069 Course Geotechnical Engineering IIA Coordinating Unit School of Civil, Environmental & Mining Eng Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Incompatible C&ENVENG 2006 Assumed Knowledge C&ENVENG 1010, MATHS 1011 & MATHS 1012 Course Description The course provides an understanding of: the nature of soils and their variability; and the state and behaviour of a soil. Topics include:
The Origin and Composition of Soils: introduction to geotechnical engineering, processes that form soils, clay mineralogy; phase relationships, Atterberg limits and soil classification: soil state definitions, phase relationships, grain size analyses, Atterberg limits, soil classification and description; vertical stress in soils: soil suction, total vertical stress, pore water pressure, effective vertical stress; flow of water through soils: water flow, permeability, 2D seepage and measurement; consolidation: introduction to consolidation theory, oedometer test, overconsolidation ratio, consolidation settlement, time rate effects, sand drains; strength of soils: shear strength of sands and clays, Mohr-Coulomb failure criterion, direct shear test, triaxial test, soil improvement: compaction - concepts, measurement and field techniques, overview of other soil improvement techniques.
Course Coordinator: Dr An DengLecturer: Dr. An Deng (firstname.lastname@example.org, N144, Engineering North, Ph: 8313 2830), School of Civil, Environmental and Mining Engineering
The full timetable of all activities for this course can be accessed from Course Planner.Lectures and Tutorials:
· Mondays, 12:10– 1 pm, Johnson Labs, G29, Rennie Lecture Theatre;
· Tuesdays, 10:10– 11 pm, Johnson Labs, G29, Rennie Lecture Theatre;
· Thursdays, 11:10am – 12 pm, Johnson Labs, G29, Rennie Lecture Theatre
Practicals (Laboratory Sessions):
· Wednesdays, 12:10 am – 2 pm, 3:10 pm – 5 pm
· Thursdays, 12:10 am – 2 pm, 3:10 pm – 5 pm
Course Learning Outcomes
- Introduce geotechnical engineering and soil mechanics in the broader discipline of civil engineering;
- Develop an understanding of the different types of soil and their engineering properties;
- Develop an awareness of soil description;
- Develop an understanding of the soil compaction and ground improvement;
- Develop an understanding of the concept of effective stress and its influence on soil behaviour;
- Develop an understanding of the influence of water flow on the engineering behaviour of soils;
- Develop an understanding of the compressibility of soils and the concept of consolidation;
- Develop an understanding of soil shear strength;
- Develop a proficiency in handling experimental data; and
- Develop the ability to report the results of a laboratory experiment at a professional standard.
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Knowledge and understanding of the content and techniques of a chosen discipline at advanced levels that are internationally recognised. 1-9 The ability to locate, analyse, evaluate and synthesise information from a wide variety of sources in a planned and timely manner. 1-9 An ability to apply effective, creative and innovative solutions, both independently and cooperatively, to current and future problems. 1-9 Skills of a high order in interpersonal understanding, teamwork and communication. 10 A proficiency in the appropriate use of contemporary technologies. 1-9 A commitment to continuous learning and the capacity to maintain intellectual curiosity throughout life. 1-9 A commitment to the highest standards of professional endeavour and the ability to take a leadership role in the community. 10 An awareness of ethical, social and cultural issues within a global context and their importance in the exercise of professional skills and responsibilities. 1-10
Required ResourcesLecture notes and other relevant learning resources, such as copies of PowerPoint slides and audio recordings of lectures, will be made available to students, at no cost, via MyUni. In addition, lecture notes can be purchased from the Image and Copy, Level 1, Hughes Building ($10 each in 2013).
The lectures are a critical component of the course. The lecture recordings (powerpoint slides and audio) will be available on MyUni after the lectures for review and for students who are absent. If a lecture is missed it is essential to view its recording prior to the next scheduled contact time.
Students are encouraged to purchase a text book for this course, although this is not essential. It is suggested that students consider purchasing ONE of the following texts, where independent exercise problems are provided.
- Holtz, R, Kovacs, W. and Sheahan, T. An Introduction to Geotechnical Engineering, 2nd ed., 2011, Pearson Prentice Hall.
- Knappett, J. and Craig, R. F., Soil Mechanics, 8th ed., 2012, Spon Press. (Solutions Manual is also available).
- Budhu, M., Soil Mechanics and Foundations, 3rd ed., 2011, Wiley.
Online LearningMyUni will be used to disseminate learning resources and information relevant to the course. Online learning modules will be used to assist your preparation for laboratory experiments and these are available on MyUni. In addition, the MyUni Discussion Boards, online Quizzes and Grade Centre will also be utilised in this course.
Learning & Teaching Activities
Learning & Teaching Modes
The course involves the following teaching and learning approaches:
- Tutorial assignments
- Online quizzes
- Physical demonstrations
- Practical classes
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
Activity Contact Hours Independent Study Hours Total Lectures 26 0 26 Tutorials 10 20 30 Assignments (formative, x5) 0 20 20 Practicals (formative, x3) 1.5 4.5 6 Bonus quizzes (formative,
x7, conditional marks to final mark)
0 3.5 3.5 Exam Preperation 0 48 48 Exam (summative, x1) 3 0 3 Total 40.5 96 136.5
Learning Activities Summary
Week Lecture Lecture Topic Day Time Date Assignments 1 1 Introduction, LS1: The Origin and Composition of Soils Mon 12-13 28-Jul 2 LS1 continued Tue 10-11 29-Jul 3 LS1 continued Thu 11-12 31-Jul 2 4 LS2: Phase Relationships Mon 12-13 4-Aug 5 LS2 continued Tue 10-11 5-Aug 6 Problem Set 1 Thu 11-12 7-Aug 3 7 LS2 continued Mon 12-13 11-Aug 8 LS2 continued Tue 10-11 12-Aug 9 Problem Set 2 Thu 11-12 14-Aug Assignment 1: LS2 4 10 LS3: Compaction Mon 12-13 18-Aug 11 LS3 continued Tue 10-11 19-Aug 12 Problem Set 3 Thu 11-12 21-Aug Assignment 1 due 5 13 LS4: Vertical Stress Mon 12-13 25-Aug 14 LS4 continued Tue 10-11 26-Aug 15 Problem Set 4 Thu 11-12 28-Aug Assignment 2: LS3&4 6 16 LS5: Flow of Water Through Soils Mon 12-13 1-Sep 17 LS5 continued Tue 10-11 2-Sep 18 Problem Set 5 Thu 11-12 4-Sep Assignment 2 due 7 19 LS5 continued Mon 12-13 8-Sep 20 LS5 continued Tue 10-11 9-Sep 21 Problem Set 6 Thu 11-12 11-Sep Assignment 3: LS5 8 22 LS6: Consolidation Mon 12-13 15-Sep 23 LS6 continued Tue 10-11 16-Sep 24 LS6 continued Thu 11-12 18-Sep Assignment 3 due Mid-Semester Break 9 25 No class - Labour Day Mon 12-13 6-Oct 26 Problem Set 7 Tue 10-11 7-Oct 27 LS6 continued Thu 11-12 9-Oct 10 28 LS6 continued Mon 12-13 13-Oct 29 Problem Set 7 continued Tue 10-11 14-Oct Assignment 4: LS6 30 LS7: Strength of Soils Thu 11-12 16-Oct 11 31 LS7 continued Mon 12-13 20-Oct 32 Problem Set 8 Tue 10-11 21-Oct Assignment 4 due 33 LS7 continued Thu 11-12 23-Oct 12 34 Problem Set 8 continued Mon 12-13 27-Oct Assignment 5*: LS7 35 No class if not needed Tue 10-11 28-Oct 36 SELT, Revision and Exam Information Thu 11-12 30-Oct
This Schedule is subject to change. Please check MyUni regularly.
Specific Course RequirementsNot applicable.
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment SummaryBreakdown of the the assessment tasks is shown in the table below.
Assessment Tasks Weighting Submission Due Date Learning Outcomes Assignments (5 sets, formative) 15% Individual 1 week after being assigned 1-8 Practicals (3 sets, formative) 15% Group 2 weeks after session 9-10 Final Examination (summative) 70% Individual 1-10 Sub-Total 100% Bonus quizzes (7 sets,
3.5 marks* Individual Flexible and before final exam 1-10
*: read the details about 3.5 conditional marks which are shown below and under ‘Bonus quizzes’.
There will be assignments set on each main lecture topic (5 in total) throughout the course. These will typically consist of 2 problems per assignment and will be submitted, marked and returned regularly throughout the semester. Each assignment will be released at the end of relevant lecture topics, and then completed and submitted in 1 week.
There are 3 compulsory practicals: soil gradation by sieve analysis, soil Atterberg limits, and soil compaction. The practicals will be carried out by students in groups of 4. Practical reports will be submitted as a group report – one submission per group and within 2 weeks after the practical session. The due date for reports which are due in semester break will be extended
to the weeks after the break, i.e., practicals conducted in weeks 7 and 8, respectively, due on the same day in weeks 9 and 10. The practical schedule, group allocations and practical data are available on MyUni. Students are expected to read the practical on-line learning modules prior to attending the laboratory sessions. The modules are available on Myuni and under the practicals tab.
There will be no ‘make-up’ laboratory sessions for students who miss their scheduled session. Students who miss a laboratory class due to medical or extenuating circumstances should present a proof to the course coordinator or practical coordinator, and endeavour to fit itself into an
active session. The students who miss the practicals should not get a free ride. Be aware that we keep the names of attendants and I will take a dim view of serial no show-ups. Up to 50% marks will be taken off for no-shows given the submission of write-ups.
When writing up a practical report, include on the report only the names of the students who attended your session.
The final examination will cover all the materials covered during the semester. The examination will be 3-hours and conducted under closed book conditions. Sheets of formulae and charts will be attached as informative tools at the end of an examination book. Supplementary or replacement exams will be awarded in accordance with the University policies.
There are 7 sets of optional online quizzes, one set for each lecture series (chapter). Each set of quiz comprises of 10 questions (e.g. multiple choice, true/false, matching, and fill in blanks), 1 point per each question and thus 10 points for each set of quiz.
The quizzes provide chances of gaining additional marks toward course final results. A set of quiz contributes up to 0.5 conditional bonus mark to the final results, and thus a total of up to 3.5 conditional bonus marks is possible out of the 7 sets of quizzes.
The quiz marks are conditional in that: 1) a grade of 10 points in a quiz is equivalent to 0.5 bonus mark, and pro rate; 2) the final bonus mark will not effect the course final mark above 85%. For instance, the combination of a weighed (assignments, pracs and final exam) mark of 83 and a final bonus mark of 3.0 simply results in 85% as a final course mark. Additional instances of combination are shown in the table below. Rounding will be applied for the real final course marks.
Weighted mark (assignments, pracs and final exam) Final bonus mark Final course mark Grade 97 2.8 97 HD 83 3.5 85 HD 72.5 2.5 75 D 70 3.3 73.3 C 65 2.8 67.8 C 47 3.0 50 P
The calculation of the final bonus mark is demonstrated in the table below.
No. of quiz attempt
Points (/10) Lecture Series 1 (LS1) LS2 LS3 LS4 LS5 LS6 LS7 1 8 7 8 8 8 5 9 2 9 6 9 7 9 6 3 8 8 9 9 5 7 4 7 5 9 7 5 6 9 6 10 6 8 9 9 7 7 9 8 9 9 10 10 10 Averaged point 8.20 7.33 8.67 8.00 7.40 7.57 9.00 Bonus mark 0.41 0.37 0.43 0.40 0.37 0.38 0.45 Final bonus mark sum of individual bonus marks = 2.81
Assessment Related RequirementsThere is no hurdle requirement for this course.
Assessment DetailFurther details of each assignment will be provided in lectures and via MyUni well before the due date.
SubmissionAssignments must be submitted to the course submission box in front of the School of Civil, Environmental and Mining Engineering Office (Eng. North N136) at or before 5 pm of the nominated
due date (i.e., one week after being released). Late submissions will be penalised at the rate
of 5% per day until the assignments are returned. No credit will be given for assignments handed up after they have been marked and returned to the class. A late submission will only be allowed when a deferred deadline has been approved by the course coordinator prior to the due date because of medical or extenuating circumstances (a proof, e.g., a medical certificate, is needed).
Any requests for extensions must be communicated by email.
Practical reports must be submitted to course submission box in front of the School of Civil, Environmental and Mining Engineering Office (Eng. North N136) at or before 5 pm two weeks after the date of a practical. The due date for reports which are due in semester break will be extended to the weeks after the break, i.e., practicals conducted in weeks 7 and 8, respectively, due on the same day in weeks 9 and 10. Late submissions will be penalised at the rate of 5% per day until the report are returned within a week.
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
- Academic Support with Maths
- Academic Support with writing and speaking skills
- Student Life Counselling Support - Personal counselling for issues affecting study
- International Student Support
- AUU Student Care - Advocacy, confidential counselling, welfare support and advice
- Students with a Disability - Alternative academic arrangements
- Reasonable Adjustments to Teaching & Assessment for Students with a Disability Policy
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangement Policy
- Academic Honesty Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.