CHEM ENG 2018 - Process Fluid Mechanics

North Terrace Campus - Semester 1 - 2014

This course aims to introduce you to the fundamentals fluid mechanics and its applications in process engineering. The focus will be on solving fluid flow problems and design of pipeline and equipment for fluid transport. Key topics covered include: The physics of fluid mechanics (fluid properties; fluid statics; fluid kinematics; conservation of mass, momentum and energy; equations of motion; dimensional analysis); The engineering of fluid mechanics (flow in pipes and conduits; flow through pipe fittings; pipe networks; flow measurement; turbomachinery). By the end of this course you should be able to understand the basic principles and analysis of both static and dynamic fluid systems, and perform design calculations on engineering fluid systems. The course is delivered through a lecture series, tutorials, self-directed learning and small group discovery.

  • General Course Information
    Course Details
    Course Code CHEM ENG 2018
    Course Process Fluid Mechanics
    Coordinating Unit School of Chemical Engineering
    Term Semester 1
    Level Undergraduate
    Location/s North Terrace Campus
    Units 3
    Contact Up to 4 hours per week
    Assumed Knowledge MATHS 1012, CHEM ENG 1007
    Course Description This course aims to introduce you to the fundamentals fluid mechanics and its applications in process engineering. The focus will be on solving fluid flow problems and design of pipeline and equipment for fluid transport. Key topics covered include: The physics of fluid mechanics (fluid properties; fluid statics; fluid kinematics; conservation of mass, momentum and energy; equations of motion; dimensional analysis); The engineering of fluid mechanics (flow in pipes and conduits; flow through pipe fittings; pipe networks; flow measurement; turbomachinery). By the end of this course you should be able to understand the basic principles and analysis of both static and dynamic fluid systems, and perform design calculations on engineering fluid systems. The course is delivered through a lecture series, tutorials, self-directed learning and small group discovery.
    Course Staff

    Course Coordinator: Dr Dzuy Nguyen

    Course Timetable

    The full timetable of all activities for this course can be accessed from Course Planner.

  • Learning Outcomes
    Course Learning Outcomes
    At the completion of this course, students will be able to:
    1 Demonstrate their understanding of the basic principles of static and fluid systems;
    2 Perform a basic analysis of static and fluid systems;
    3 Devise simple solutions to a range of problems in basic fluid flow;
    4 Work proficiently and effectively in small teams;
    5 Present their understanding and analysis of problems using methodical and clearly
    demonstrated worked solutions;
    6 Participate constructively in class discussions and presentations;
    7 Use appropriate modelling tools to design pipelines and equipment;
    8 Undertake basic design calculations of fluid engineering systems; and
    9 Understand and articulate the principles that are in operation in a range of fluid motive
    and flow measuring devices.
    University Graduate Attributes

    No information currently available.

  • Learning Resources
    Recommended Resources
    Textbook

    Munson BR, Rothmayer AP, Okiishi TH, Huebsch WW (2009) Fundamentals of Fluid Mechanics, 7th Edition, John Wiley and Sons.

    Reference Books

    Holland FA, Bragg R 1995, Fluid Flow for Chemical Engineers, 2nd Edition, Edward Arnold.

    Darby R 2001, Chemical Engineering Fluid Mechanics, Marcel Dekker.

    Gerhart PM, Gross RJ, Hochstein JI 1992, Fundamentals of Fluid Mechanics, 2nd Edition, Addison-Wesley.

    Online Learning
    A range of online resources will be provided via MyUni.
  • Learning & Teaching Activities
    Learning & Teaching Modes
    Students will be given the opportunity to demonstrate their understanding of the key concepts of the course during tutorial sessions; group activities and in a final examination.
    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    Activity Contact Hours Workload Hours
    Lectures 22 45
    Tutorials 22 45
    Total 44 90
    Learning Activities Summary
    Topic 1: Introduction to Fluids and Fluid Mechanics
    Definition of a fluid; shear, strain rate and viscosity; compressible and incompressible flows; inviscid and viscous flows; steady and unsteady flow; laminar and turbulent flow.

    Topic 2: Fluid Properties

    Definition of quantity and property, intensive and extensive properties; density; absolute, gauge and vacuum pressures; thermal properties; compressibility and elasticity; thermal expansion; surface tension; dynamic viscosity; kinematic viscosity.

    Topic 3: Fluid Statics
    Pascal’s law; Archimedes principles; force on a submerged body.

    Topic 4: Fluid kinematics

    Flow regimes; Lagrangian and Eulerian descriptions; streamlines, streaklines and pathlines; dimensionality and directionality.

    Topic 5: Conservation of Mass, Momentum and Energy
    Control-volume rate-of-change equation; simplified forms; equation of continuity; energy equations;
    Bernoulli’s equation; momentum equation.

    Topic 6: Dimensional Analysis
    Geometric, kinematic and dynamic similarity in fluid mechanics; Buckingham’s Pi Theorem; key parameters for incompressible and compressible flows.

    Topic 8: Flow in pipes and conduitsRegimes of flow; developing flow; energy loss in pipes; Darcy-Weisbach equation; friction factor; Hagen-Poiseuille equation; pipe flow calculations.

    Topic 9: Flow through pipe fittings
    Expansions and contractions; loss coefficients; equivalent lengths.

    Topic 10: Pipe networks
    Multiple pipe systems; pipe networks; economic pipe diameter.

    Topic 11: Flow measurement
    Venturi and orifice meters; rotameters; Pitot and impact tubes.

    Topic 12: Turbomachinery
    Centrifugal machines; centrifugal pump selection and sizing; NPSH; similarity and scaling laws; other turbomachines.

  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary

    No information currently available.

    Assessment Detail

    No information currently available.

    Submission

    No information currently available.

    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through Access Adelaide.

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.

The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.