FOOD SC 3503RG - Food Processing Technology III
Regency Park - Semester 2 - 2016
General Course Information
Course Code FOOD SC 3503RG Course Food Processing Technology III Coordinating Unit School of Agriculture, Food and Wine Term Semester 2 Level Undergraduate Location/s Regency Park Units 3 Contact Up to 6 hours per week Available for Study Abroad and Exchange N Prerequisites FOOD SC 1000RG Assumed Knowledge FOOD SC 2503RG Course Description This course has an advanced food processing component and overviews the various conventional and emerging non thermal food processing methods available to maximize the nutrition levels in the making of foods that are safe, high quality and with maximum shelf life and convenience. The course explores various advanced methods of food processing technology available in Australia. The course will give students an understanding of the advanced principles of food processing and how to choose a method of preservation in relation to food composition. Occupational health and safety, food safety and food quality aspects of food and beverage processing are an integral component of all coursework.
Course Coordinator: Rai PeradkaRai Peradka
RIC Regency Campus
The full timetable of all activities for this course can be accessed from Course Planner.
Course Learning Outcomes
1 Outline the process of red and white meat slaughter, explain meat structure and inspect meat quality parameters. 2 Process manufactured meat products to produce variety of animal food products. 3 Identify the areas of concern in the processing of meat products, in relation to process control, undesirable microbes and export. 4 Explain the requirements for meat export and chemical and physiological structure of meat. 5 Demonstrate processing techniques used to produce a variety of milk products. 6 Analyse the process of harvesting, processing and storage of seafood. 7 Evaluate variety of egg products produced in the food processing industry including egg structure and egg quality. 8 Understand the sources and processing of Edible Fats and Oils. 9 Work in teams to develop communication skills and comply Good Manufacturing Practices.
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1-8 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
3-7 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
2,9 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
1,2,5,6 Intercultural and ethical competency
- adept at operating in other cultures
- comfortable with different nationalities and social contexts
- Able to determine and contribute to desirable social outcomes
- demonstrated by study abroad or with an understanding of indigenous knowledges
2,5,9 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
1. Meat Science 5th Edn. R A Lawrie, 1991. British Library Cat. UK
2. Meat Safety Quality and Veterinary Public Health, Eddie Andriessen, 1998
3. Handbook of Meat Technology, Michael D Ranken, 2000. Blackwell Sciences
4. Meat Products Handbook - Practical Science and Technology, Ferner, G., 2006, Woodhead Publishing Ltd
5. Advanced Technologies for Meat Processing, Edited by Leo M. L. Nollet & Fidel Toldra, 2006. CRC Press, US.
6. Dairy Science and Technology,2nd Ed., Walstra, Pieter, 2006, Boca Raton: Taylor & Francis.
7. Poultry meat processing and quality, Mead, G C.,2004, Boca Raton : CRC Press.
8. Handbook of food products manufacturing : volume 1&2, 2007, Hoboken, N.J. : Wiley
Online LearningStudents will need to regularly access the Food Processing Technology IIl, My Uni course site for:
1. Course announcements, including information regarding changes to the course program.
2. Copies of the lecture power points. These will be uploaded onto the course My Uni site prior to each lecture. Students are expected to download the PowerPoint as lecture handouts and bring these with them
to the lecture.
3. Copies of assignments and assessment information
My Uni can be accessed via http://myuni.adelaide.edu.au/.
Learning & Teaching Activities
Learning & Teaching ModesLectures supported by practicals to develop the material covered in the lectures. Time allocated to lectures and practicals can be used for tutorials on request.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.A student enrolled in a 3 unit course, such as this, should expect to spend, on average 12 hours per week on the studies required. This includes both the formal contact time required to the course (e.g., lectures and practicals), as well as non-contact time (e.g., reading and revision).
Learning Activities Summary
Topic Lecturer Week 1 Red Meat Processing
Small Goods practical
R. Peradka Week 2 Red Meat Processing
Small Goods practical
R. Peradka Week 3 Red Meat Processing
Small Goods practical
Week 4 Red Meat Processing
Small Goods practical
R. Peradka Week 5 Red Meat Processing
Small Goods practical
Week 6 Seafood processing
Fish inspection & processing practical
R. Peradka Week 7 Seafood processing
Week 8 Poultry processing
R. Peradka Week 9 Egg processing
Egg processing pr
Week 10 Dairy Processing
Flavoured Milk practical
R. Peradka Week 11 Edible Fats & Oils
R. Peradka Week 12 Edible Fats & Oils
Revision of all topics Exam details
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment % of final marks Due Learing outcomes assessed Practical reports I & II 20
Two weeks after completion of the practal _TBA
2,5,7,9 Assignment 20 Week 6 1 - 8 Final Exam 60 As per examination timetable 1- 8
Assessment DetailTask 1
Practical report 1 & 2
Answer questions will be based on practical aims, outcomes and skills learnt. Students required interpreting and discussing the results. This includes costing, suggestions for improvements and minimising error.
Some practical may require full formal practical write up including Aims, Introduction, Materials & Method, Results, Discussion and Conclusion
Students will be required to:
1 apply their knowledge and understanding of the principles of hygiene, food handling, cross contamination, cleaning and sanitising and working through the process chart and application of HACCP
2 research information about food preservation techniques and food spoilage from a variety of sources
3 analyse the data collected and evaluate and critique information gathered in relation to the observed results
4 produce table, graphs and diagrams
Further details of this report will be given during the practical sessions.
Practical report 1 & 2 contributes to 20% of the overall mark for this course.
Long answer questions.
Students will be required to:
1. apply their knowledge and understanding of material covered in the lecturers to unfamiliar problems;
2. research information from a variety of sources
3. analyse data and produce charts, diagrams and discuss
4. synthesise solutions to novel problems
5. evaluate and critique information.
Further details of this assignment will be given during the lectures.
Assignments contribute to 20% of the overall mark for this course.
All assessable components must be handed in at the Applied Food Studies Office, Regency TAFE by 2.00pm of the due date.
If an extension is not applied for, or not granted then a penalty for late submission will apply. A penalty of 10% of the value of the assignment for each calendar day that the assignment is late (i.e. weekends count as 2 days), up to a maximum of 50% of the available marks will be applied. This means that an assignment that is 5 days late or more without an approved extension can only receive a maximum of 50% of the marks available for that assignment.
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
- Academic Support with Maths
- Academic Support with writing and speaking skills
- Student Life Counselling Support - Personal counselling for issues affecting study
- International Student Support
- AUU Student Care - Advocacy, confidential counselling, welfare support and advice
- Students with a Disability - Alternative academic arrangements
- Reasonable Adjustments to Teaching & Assessment for Students with a Disability Policy
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangement Policy
- Academic Honesty Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.