CHEM ENG 3035 - Multi-Phase Fluid & Particle Mechanics

North Terrace Campus - Semester 1 - 2016

The course information on this page is being finalised for 2016. Please check again before classes commence.

This course introduces you to the fundamentals fluid and particle mechanics as applied to the handling, processing and transport of multiphase systems. The focus will be on industrial processes where fluid (liquid or gas) flowing in the presence of particulate solids is encountered. Key topics covered include: particulate systems; mechanics of particles in a fluid; flow through porous media; sedimentation; fluidisation; filtration; solid-fluid transport. By the end of this course you should be able to characterise and describe fluid-particle systems in terms of their basic physical properties, and perform basic design calculations and analyses of various typical industrial processes involving fluid and particle systems.

  • General Course Information
    Course Details
    Course Code CHEM ENG 3035
    Course Multi-Phase Fluid & Particle Mechanics
    Coordinating Unit School of Chemical Engineering
    Term Semester 1
    Level Undergraduate
    Location/s North Terrace Campus
    Units 3
    Contact Up to 4 hours per week
    Available for Study Abroad and Exchange Y
    Incompatible CHEM ENG 3018
    Assumed Knowledge CHEM ENG 2018
    Course Description This course introduces you to the fundamentals fluid and particle mechanics as applied to the handling, processing and transport of multiphase systems. The focus will be on industrial processes where fluid (liquid or gas) flowing in the presence of particulate solids is encountered. Key topics covered include: particulate systems; mechanics of particles in a fluid; flow through porous media; sedimentation; fluidisation; filtration; solid-fluid transport. By the end of this course you should be able to characterise and describe fluid-particle systems in terms of their basic physical properties, and perform basic design calculations and analyses of various typical industrial processes involving fluid and particle systems.
    Course Staff

    Course Coordinator: Dr Dzuy Nguyen

    Course Timetable

    The full timetable of all activities for this course can be accessed from Course Planner.

  • Learning Outcomes
    Course Learning Outcomes
    At the completion of this course, students will be able to:
    1 Characterise and describe fluid-particle systems in terms of their basic physical properties;
    2 Predict the velocity of particles moving in a fluid as a function of particle characteristics (size, shape, deformability and concentrations) and fluid properties; and
    3 Perform basic design calculations and analyses of typical fluid-particle operations and related industrial equipment.
    University Graduate Attributes

    No information currently available.

  • Learning Resources
    Recommended Resources
    Reference Books

    Coulson, JM & Richardson JF 1996, Chemical Engineering, V.2, 4th Edition, Butterworth-Heinemann, Oxford.

    Foust, AS et al 1980, Principles of Unit Operations, 2nd Edition, Wiley and Sons, New York.

    Perry, RH & Green, DW 1998, Perry's Chemical Engineers' Handbook, 7th Edition, McGraw-Hill, New York.

    Online Learning
    A range of online resources will be provided via MyUni.
  • Learning & Teaching Activities
    Learning & Teaching Modes

    No information currently available.

    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    Activity Contact Hours Workload Hours
    Lectures 24 48
    Tutorials 21 40
    TOTAL 45 90
    Learning Activities Summary
    Topic 1: Particulate Systems

    Description, characterisation and classification

    Topic 2: Mechanics of Particles in a Fluid

    Rigid particles; Deformable particles (bubbles and drops); Multi particle systems

    Topic 3: Flow through Porous Media

    Single-phase flow;  Two-phase flows (co-current and counter-current)

    Topic 4: Sedimentation

    Batch sedimentation;  Continuous sedimentation; Thickener analysis and design

    Topic 5: Fluidisation

    Theory; Particulate fluidisation; Aggregative fluidisation

    Topic 6: Filtration

    Theory; Batch filtration operations; Continuous filtration

    Topic 7: Solid-Fluid Transport

    Pneumatic transport of solids by pipeline; Hydraulic transport of solids by pipeline

  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary

    No information currently available.

    Assessment Detail

    No information currently available.

    Submission

    No information currently available.

    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through Access Adelaide.

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.

The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.