MECH ENG 7070 - Heat Transfer & Thermodynamics
North Terrace Campus - Semester 1 - 2018
General Course Information
Course Code MECH ENG 7070 Course Heat Transfer & Thermodynamics Coordinating Unit School of Mechanical Engineering Term Semester 1 Level Postgraduate Coursework Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Course Description Heat transfer modes: conduction, convection and radiation. Heat exchanger design and optimization, numerical methods, and mass transfer. Exergy analysis; Vapour power cycles; Gas power cycles; refrigeration cycles; non-reacting mixtures and psychrometry; reacting processes and combustion including dissociation
Course Coordinator: Professor Bassam Dally
The full timetable of all activities for this course can be accessed from Course Planner.
Course Learning OutcomesOn successful completion of this course students will be able to:
1 Discuss the fundamental laws and principles of thermodynamics and heat transfer; 2 Apply these principles to real thermo-fluids systems; 3 Explain current practice in the area of thermo-fluids; and 4 Recognise environmental issues associated with energy conservation, efficiency, pollution control, etc.
The above course learning outcomes are aligned with the Engineers Australia Stage 1 Competency Standard for the Professional Engineer.
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 2.3 3.1 3.2 3.3
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1-4 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
1-2 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
2,4 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
1-4 Intercultural and ethical competency
- adept at operating in other cultures
- comfortable with different nationalities and social contexts
- able to determine and contribute to desirable social outcomes
- demonstrated by study abroad or with an understanding of indigenous knowledges
3-4 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
Course notes – these are essential and required for both Heat Transfer and Thermodynamics.
- Bergman, Lavine, Incropera and Dewitt., Fundamentals of Heat and Mass Transfer, 7th Edition, John Wiley & Sons, 2011.
- Moran and Shapiro, Fundamentals of Engineering Dynamics, 6th Edition, John Wiley & Sons, 2008
Recommended ResourcesThe Barr Smith Library has many textbooks, which are concerned with Heat Transfer and Thermodynamics. Students are encouraged to consult these books to enrich their knowledge in both topics.
Learning & Teaching Activities
Learning & Teaching ModesLectures supported by problem-solving tutorials developing material covered in lectures.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.The required time commitment is 32 hours attendance at lectures, 16 hours tutorials, 6 hours practicals, 48 hours of revising course material and 50 hours completing assignments, reports and preparing for exam.
Learning Activities Summary
Lecture 1: Introduction to Heat Transfer Lecture 2: Conduction – An Introduction Lecture 3: Conduction – Steady-State 1-D Lecture 4: Conduction – Steady-State, Multidimensional Lecture 5: Conduction – Transient/Unsteady Conduction Lecture 6: Conduction – Numerical Methods Lecture 7: Convection – An Introduction Lecture 8: Convection – External Convection Lecture 9: Convection – Internal Convection Lecture 10: Convection - Free Convection Lecture 11: Radiation – An Introduction Lecture 12: Radiation – Exchange between Surfaces Lecture 13: Heat Exchangers – An Introduction Lecture 14: Heat Exchangers – Design and Selection Lecture 15: Mass Transfer – Introduction Lecture 16: Mass Transfer - Discontinuous Interfaces
Lecture 1-2: Thermodynamics I Revision and Overview Lecture 3-6: Vapour Power Systems Lecture 7-9: Gas Power Systems Lecture 10-12: Refrigeration & Heat Pumps Lecture 13-14: Ideal gas Mixtures & Psychrometrics Lecture 15-16: Reacting Mixtures and Combustion
Specific Course RequirementsNONE
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Assignments (7 total) 22.5 Individual Summative 4,5,7,9,10,12,13 1. 2. 4. Practical Reports (2 total) 7.5 Group/Individual Summative Week 2-12 Min 35% 2. Quizes (10 Total) 5 Individual Summative fortnightly 1. 3. Final Exam 65 Individual Summative Exam period 1. 2. 3. 4. Total 100
This assessment breakdown complies with the University's Assessment for Coursework Programs Policy.
This course has a hurdle requirement. Meeting the specified hurdle criteria is a requirement for passing the course.
Assessment Related RequirementsNONE
Assessment DetailFour individual assignments on Heat Transfer, Four individual assignments on Thermodynamics and Three group assignments on Thermodynamics.
SubmissionStudents will be contacted directly with clear instructions and all information will be posted on MyUni
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
- Academic Support with Maths
- Academic Support with writing and speaking skills
- Student Life Counselling Support - Personal counselling for issues affecting study
- International Student Support
- AUU Student Care - Advocacy, confidential counselling, welfare support and advice
- Students with a Disability - Alternative academic arrangements
- Reasonable Adjustments to Teaching & Assessment for Students with a Disability Policy
- LinkedIn Learning
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangement Policy
- Academic Honesty Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.