ELEC ENG 7074 - Power Systems PG
North Terrace Campus - Semester 2 - 2018
General Course Information
Course Code ELEC ENG 7074 Course Power Systems PG Coordinating Unit School of Electrical & Electronic Engineering Term Semester 2 Level Postgraduate Coursework Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Incompatible ELEC ENG 3031 Assumed Knowledge ELEC ENG 1009 and ELEC ENG 1010 or equivalent Course Description Introduction to Power System Analysis; Transmission line parameters; Transmission line steady-state operation; Power transformers; Network equations and power flows computation; Symmetrical faults; Symmetrical components and unsymmetrical faults; Power system operation, controls and stability.
Course Coordinator: Mr David Vowles
The full timetable of all activities for this course can be accessed from Course Planner.
Course Learning OutcomesOn successful completion of this course students will be able to:
1 Formulate and solve the mathematical models describing steady-state physical behavior of transmission and distribution lines; 2 Define and describe operational concepts such as: flow of active & reactive power, voltage profile, steady-state stability, power flow limits & line loadability, voltage regulation, Surge Impedance Loading; 3 Analyse line compensation techniques as applied in reactive power – voltage control and active power flow control; 4 Formulate the mathematical models of interconnected electrical power networks; 5 Simulate and analyse steady-state behavior of small-size electrical power networks using Power Flows software tool; 6 Formulate the mathematical models and apply network solution techniques used in analyzing faults in power systems; 7 Simulate and analyse faults in small-size electrical power networks using Fault Analysis software tool; and 8 Explain basic concepts and mathematical models of power system control and stability.
The above course learning outcomes are aligned with the Engineers Australia Stage 1 Competency Standard for the Professional Engineer.
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 2.1 2.2 3.2 3.5
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1-8 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
Required ResourcesThere are no required textbooks. A set of course notes, practice problems and other supporting materials will be delivered via email as well as available for downloading from the course web site.
Recommended ResourcesJ.D. Glover, M.S. Sarma and T.J. Overbye, “Power System Analysis and Design”, Thomson Learning, 2008
PowerWorld Simulator software available at http://powerworld.com/gloversarmaoverbye
Online LearningCourse notes, tutorial problems and solutions, laboratory exercises and practice problems will all be available for downloading from MyUni.
Learning & Teaching Activities
Learning & Teaching ModesThis course relies on lectures as the primary delivery mechanism for the material. Tutorials supplement the lectures by providing exercises and example problems to enhance the understanding obtained through lectures. Practicals are used to provide hands-on experience for students to reinforce the theoretical concepts encountered in lectures. Continuous assessment activities provide the formative assessment opportunities for students to gauge their progress and understanding.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
Activity Contact hours Workload hours Lecture 32 lectures 32 68 Tutorials tutorials 6 12 Practicals Power Flows software tool 6 16 Fault Analysis software tool 5 16 Design Project 5 16 Homeworks 14 Quizzes 3 3 20 TOTALS 57 161
Learning Activities Summary
Activity Week Topic Lecture & Tutorial & Homework 1 Introduction, Transmission Lines: Steady-state operation (two-port equivalents, short lines) Lecture & Tutorial & Homework 2 Transmission Lines: Steady-state operation (medium-length lines, nominal pi-equivalent, voltage regulation) Lecture & Tutorial & Homework 2, 3 Transmission Lines: Steady-state operation (line differential equation, distributed parameter line, equivalent pi-model, lossless lines, surge impedance loading, voltage profile, steady state stability limit) Lecture & Tutorial & Homework 3 Transmission Lines: Steady-state operation (maximum power flow, line loadability) Lecture & Tutorial & Homework 3, 4 Transmission Lines: Steady-state operation (reactive power compensation) & Power Flows Practical Assignment PG (10%) 4 Design Project Lecture & Tutorial 4, 5 Power Flows Practical Assignment 1 (15%) 5 Power Flows Study using Power World Simulator Quiz 1 (20%) 6 Transmission lines & Power flows Lecture & Tutorial & Homework 8, 9 Symmetrical and Unsymmetrical Faults Quiz 2 (20%) 9 Symmetrical and Unsymmetrical Faults Practical Assignment 2 (15%) 9 Fault Analysis using Power World Lecture & Tutorial 10, 11 Power System Control and Stability Quiz 3 (20%) 12 Faults & System Stability
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Tutorials (six) 5 Individual Formative 2, 4, 6, 7, 9, 11 1. 2. 3. 4. 5. 6. 7. 8. Quizzes (two) 15 Individual Formative 5, 10 1. 2. 3. 4. 5. 6. Practical Assignments (two) 20 Individual Formative 8, 12 >40% 1. 2. 3. 4. 5. 8. Examination 60 Individual Summative >40% 1. 2. 3. 4. 5. 6. 7. 8. Total 100
This assessment breakdown is registered as an exemption to the University's Assessment for Coursework Programs Policy. The exemption is related to the Procedures clause(s): 1. b. 3.
This course has a hurdle requirement. Meeting the specified hurdle criteria is a requirement for passing the course.
Assessment DetailDetails of individual assessment tasks will be provided during the semester.
SubmissionAll written submissions of practical assignments are to be submitted to Rastko Zivanovic on the specified dated and during lecture hours and must be accompanied by a signed cover sheet.
Copies of blank cover sheets are available from the School office in Ingkarni Wardli 3.26. No late submissions will be accepted. All assessments will have a two week turn-around time for provision of feedback to students. Full details can be found at the School policies website: http://www1.eleceng.adelaide.edu.au/students/policies/
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
- Academic Support with Maths
- Academic Support with writing and speaking skills
- Student Life Counselling Support - Personal counselling for issues affecting study
- International Student Support
- AUU Student Care - Advocacy, confidential counselling, welfare support and advice
- Students with a Disability - Alternative academic arrangements
- Reasonable Adjustments to Teaching & Assessment for Students with a Disability Policy
- LinkedIn Learning
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangement Policy
- Academic Honesty Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.