CHEM ENG 7056 - Process Control and Instrumentation
North Terrace Campus - Semester 2 - 2020
General Course Information
Course Code CHEM ENG 7056 Course Process Control and Instrumentation Coordinating Unit School of Chemical Engineering Term Semester 2 Level Postgraduate Coursework Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Incompatible CHEM ENG 3015, CHEM ENG 3031 Assumed Knowledge MATHS 2201, CHEM ENG 2010 Course Description The purpose of this course is to introduce the key concepts in automatic control and instrumentation of process plants. Material and energy balances are extended to unsteady state (dynamic) systems and Laplace Transforms are introduced as a means of conveniently representing process control systems and solving ordinary differential equations. First order, second order, and integrating systems including dead time are treated with basic controller algorithms. Commonly used sensing, transmission and final control elements are described and depicted in piping and Instrumentation Diagrams (P&IDs). The course is delivered through a combination of lectures, tutorials, practicals and exposure to simulation programs currently used in industry. Once you have completed the course, you should be able to characterise and tune simple processes and appreciate the relevance of control systems to safety and profitability.
Course Coordinator: Professor Zeyad Alwahabi
The full timetable of all activities for this course can be accessed from Course Planner.
Course Learning OutcomesOn successful completion of this course students will be able to:
1 Explain the basic principles & importance of process control in industrial process plants; 2 Specify the required instrumentation and final elements to ensure that well-tuned control is achieved; 3 Explain the use of block diagrams & the mathematical basis for the design of control systems; 4 Design and tune process (PID) controllers; 5 Use appropriate software tools (e.g. Matlab Control Toolbox & Simulink) for the modelling of plant dynamics and the design of well tuned control loops; 6 Explain the importance and application of good instrumentation for the efficient design of process control loops for process engineering plants; and 7 Draw a PID (Process & Instrumentation Diagram) & devise simple but effective plant wide control strategies using appropriate heuristics.
The above course learning outcomes are aligned with the Engineers Australia Stage 1 Competency Standard for the Professional Engineer.
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 2.1 2.2 3.1
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1-7 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
Stephanopoulos, G 2005, Chemical Process Control; An Introduction to Theory & Practice, Prentice-Hall
Seborg, DE, Edgar TF & Mellichamp DA 2008, Process Dynamics & Control, 2nd Edition, John Wiley.
Online LearningA range of online resources will be provided via MyUni.
Learning & Teaching Activities
Learning & Teaching Modes
No information currently available.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
Activity Contact Hours Workload Hours Lectures 23 46 Tutorials 20 40 Quizzes 2 4 TOTAL 45 90
Learning Activities SummaryTopic 1: Model Development & Differential Equations
Solution of differential equations; use of Laplace transforms; development of dynamic models; Taylor series linearization of non-linear differential equations, inverse Laplace transforms; partial fraction expansion.
Topic 2: Block Diagrams
Closed-loop systems; block-diagram algebra.
Topic 3: Step Responses & Controller Algorithms
Step response of first & second-order systems, PID control – simple elements proportional, integral
& derivative mode; ideal & real-world controllers.
Topic 4: More Complex Transfer Functions
Higher-order systems; inverse response; dead time.
Topic 5: Stability
Introduction; poles & zeros; Argand diagrams; Routh array, root locus plots; degrees of freedom.
Topic 6: Controller Tuning & Model Fitting
Model development using plant step test data; Cohen Coon & Zeigler Nichols tuning methods.
Topic 7: Process Instrumentation
Sensors & transducers; data transmission; accuracy & repeatability, final elements in control loop;
pressure, temperature, level & flow rate measurement.
Topic 8: Final elements
Motor speed control; control valves – installed & inherent characteristics; PID (Process control &
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Further information will be available prior to the start of the semester. Total 0
This assessment breakdown is registered as an exemption to the University's Assessment for Coursework Programs Policy. The exemption is related to the Procedures clause(s): 1. b. 3.
No information currently available.
No information currently available.
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
- Academic Support with Maths
- Academic Support with writing and speaking skills
- Student Life Counselling Support - Personal counselling for issues affecting study
- International Student Support
- AUU Student Care - Advocacy, confidential counselling, welfare support and advice
- Students with a Disability - Alternative academic arrangements
- Reasonable Adjustments to Teaching & Assessment for Students with a Disability Policy
- LinkedIn Learning
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangement Policy
- Academic Honesty Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.