PLANT SC 7250WT - Regulatory Approval for GM Plants
Waite Campus - Semester 2 - 2016
General Course Information
Course Code PLANT SC 7250WT Course Regulatory Approval for GM Plants Coordinating Unit School of Agriculture, Food and Wine Term Semester 2 Level Postgraduate Coursework Location/s Waite Campus Units 3 Contact Up to 15 hours per week for 3 weeks Available for Study Abroad and Exchange Y Assumed Knowledge PLANT SC 7225WT Restrictions Available to Biotechnology (Plant Biotechnology) students only Course Description Plant biotechnology is widely viewed as a key tool in ensuring world food security. However, throughout the world, the use and access of the technology is subject to strict legislative restrictions and regulatory oversight. This course will examine the various requirements and processes related to commercialisation of materials generated by plant biotechnology necessary to remain compliant within regulatory frameworks. The regulatory requirements of plant biotechnology both within Australia and overseas will be covered and discussed in conjunction with related regulation on quarantine and food safety. This course will also consider the management of plant biotechnology development.
A key intended learning outcome is to develop a solid grounding in the processes and requirements imposed by the various regulatory authorities to allow the practitioners of plant biotechnology to bring a product to the market place.
Course Coordinator: Dr Carlos Rodriguez Lopez
The full timetable of all activities for this course can be accessed from Course Planner.This course is a short intensive course that runs over three weeks and will be delivered by the following means:
5 lectures of 1 hour each per week
2 class exercise (6h per week total)
2 tutorials of 2h per week
Course Learning OutcomesSuccessful students will be able to:
Discuss and analyse Australian and international approaches to the regulation and management of plant biotechnology and evaluate the strengths and weaknesses of different legislative approaches.
2 Understand and evaluate the impact of international treaties, legislation and protocols on management of plant biotechnology. 3 Understanding of the scientific principles underpinning the regulation 4 Design and manage data generation leading towards the deregulation of transgenic plants 5 Apply their knowledge to practical problems in management or regulation of plant biotechnology
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1,2,3 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
4,5 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
4,5 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
3,5 Intercultural and ethical competency
- adept at operating in other cultures
- comfortable with different nationalities and social contexts
- Able to determine and contribute to desirable social outcomes
- demonstrated by study abroad or with an understanding of indigenous knowledges
1 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
Required ResourcesThis course will require the following texts and other resources:
ICGEB collection of Biosafety reviews
Online LearningOn-line resources (BCH, web sites of national competent authorities, OECD website, ICGEB).
Learning & Teaching Activities
Learning & Teaching ModesThis course is a short intensive course that runs over three weeks and will be delivered by the following means:
5 lectures of 1 hour each per week
2 class exercise (6h per week total)
2 tutorials of 2h per week
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.This course will require approximately 156 hours comprising scheduled contact time and private study.
Learning Activities SummaryThe course content will include the following:
Week 1 Legislative context:
• Protection of germplasm and IP – Patents; copyrights; plant breeders’ rights; traditional knowledge
• Regulatory framework and requirements in Australia
• Cartagena Protocol on Biosafety and its requirements
• Regulation in other parts of the world
• International standards for dossier compilation (Familiarity, Substantial Equivalence, ERA)
• Patent searching; Accessing and utilising germplasm databases
• Description of biosafety activity in named countries based on information retrieved from Biosafety Clearing House
• Presentation on the reconstruction of the history of an event (from development to proposed introduction into a named territory) using the BCH and other internet resources
Week 2 Principles of Risk Analysis:
• Problem formulation
• Risk Assessment
• Risk Management and compliance
• Risk Communication
• Dossier compilation for submission to regulators
• Compile application for confined field trials
• Scope information needs for named deregulations
• Written report: partial dossier compilation for release of a named event in a country other than Australia
Week 3 Implementation:
• Generating risk scenarios and risk hypotheses
• Gap analysis
• Tiered risk assessment
• Dossier-relevant data gathering from confined field trials
• Effective testing of risk hypotheses
• Visit to a plant breeding program to examine its structure and management
• Visit to a food processing organisation
• Case studies: using substantial equivalence as a baseline for food safety
• Design of CFTs to optimise plant characterisation
• Written scoping plan to compile a complete deregulation dossier
Class exercise/tutorial report:
• Written report on class exercises/tutorials will be compiled by each student
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Task Task Type Weighting Learning Outcome Group Assignment 1, retracing history of an event) Formative/Diagnostic 20% 1,2 Individual Assignment (Partial Dossier report) Formative & Summative 20% 1,3,4,5 Individual Assignment (Dossier scoping plan) Summative 30% 1,2,3,4,5 Reports on class exercises Summative 30% 1,2,3,4,5
Assessment DetailGroup Assignment (retracing the history of an event using authorised internet resources): (20% of total course grade). In this problem-solving task, the students will use critical thinking and understanding of the e-resources and regulatory processes to retrace the history of a real event as if it were to be imported into a named country under the Cartagena Protocol. The students will prepare and deliver an oral presentation followed by questions and answers. The presentation will be embedded in a tutorial and they will receive instant feedback.
Individual Assignment (partial dossier report): (20% of total: 1000-1500 words). Written reports representing a section of a dossier (as compiled by notifiers) will be handed in at the end of the week and rapidly assessed for content and relevance to regulatory obligations. This report will integrate the various elements of the course (scientific basis underpinning regulation, the regulatory process and data gathering and interpretation) to assemble a key section of a dossier in a suitable form for regulatory oversight.
Students will receive written feedback within 3 days of the assessment.
Individual Assignment (Scoping dossier report 1000-1500 words):(30% of total). In this exercise, the student will compile and order all of the key elements required to assemble a complete dossier in support of deregulation of a GM crop within a named country. This will require creative thinking (problem formulation) integrated with the structural and regulatory elements required by the relevant regulatory authority. Written feedback will be given within 5 days.
Class Exercise and Tutorial Report (30% of total:1000-1500 words) : Here the students will be expected to retrieve the essential elements of each of the exercises into a coherent and integrated report relating to the vital information for inclusion in a submission dossier. Feedback will be given within 5 days of completion.
If an extension is not applied for, or not granted then a penalty for late submission will apply. A penalty of 10% of the value of the assignment for each calendar day that the assignment is late (i.e. weekends count as 2 days), up to a maximum of 50% of the available marks will be applied. This means that an assignment that is 5 days late or more without an approved extension can only receive a maximum of 50% of the marks available for that assignment.
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
- Academic Support with Maths
- Academic Support with writing and speaking skills
- Student Life Counselling Support - Personal counselling for issues affecting study
- International Student Support
- AUU Student Care - Advocacy, confidential counselling, welfare support and advice
- Students with a Disability - Alternative academic arrangements
- Reasonable Adjustments to Teaching & Assessment for Students with a Disability Policy
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangement Policy
- Academic Honesty Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.