ELEC ENG 1101 - Electronic Systems

North Terrace Campus - Semester 1 - 2022

This course develops a basic understanding of the fundamentals and principles of analog and digital circuits and electronic devices. This understanding is a critical step towards being able to design new electronic circuits or use them appropriately as part of a larger engineering system. Hence the course seeks to develop foundational concepts and skills, but does so through a series of application-oriented topics such as the design of DC power supplies, speed control of electric motors, audio amplification and digital audio effects. Learning opportunities include: online presentations with integrated practice exercises; tutorials in which small teams work together to explore, discuss, analyse and explain electronic circuits; and practicals in which theory is put to practical application. Important topics covered include: the key electrical variables and the application of fundamental circuit laws and theorems to DC and AC resistive circuits; power supply applications of diodes and switch-mode transistors; the operating principles of DC, induction and synchronous machines; analysis of simple operational and single-MOSET amplifiers; Boolean logic and binary arithmetic; combinational and sequential circuits; and simple microcontroller programming. The course is designed to be a broad introduction to electronic systems for students from diverse engineering disciplines. Completing the course will provide the necessary foundation to understand the role, capabilities and constraints of electronics in contemporary engineering systems.

  • General Course Information
    Course Details
    Course Code ELEC ENG 1101
    Course Electronic Systems
    Coordinating Unit School of Electrical & Electronic Engineering
    Term Semester 1
    Level Undergraduate
    Location/s North Terrace Campus
    Units 3
    Contact Typically 2 hours per week, up to 6 hours in weeks with practicals
    Available for Study Abroad and Exchange Y
    Incompatible ELEC ENG 1100, ELEC ENG 1101UAC
    Assessment Final exam, mid-semester tests, online tests, tutorial participation and practical work
    Course Staff

    Course Coordinator: Associate Professor Braden Phillips

    Lectures / Course Coordinator
    Name: Assoc. Prof. Braden Phillips
    Email: braden.phillips@adelaide.edu.au
    Room: Ingkarni Wardli 3.38

    Name: Assoc. Prof. Wen Soong
    Email: wen.soong@adelaide.edu.au
    Room: Ingkarni Wardli 3.53

    Practical Coordinator
    Name: Dr Hong-Gunn Chew
    Email: honggunn.chew@adelaide.edu.au
    Room: Ingkarni Wardli 3.52
    Course Timetable

    The full timetable of all activities for this course can be accessed from Course Planner.

    The course is presented as 6 topics. For each topic there are the following scheduled activities:

    1. Pre-Recorded Presentations
    Pre-recorded videos that present the theory for each topic are scheduled for each week.

    2. Workshops
    Two-hour workshops occur weekly throughout the semester. There are 2 workshops for each topic. In workshops, students work in small groups on a variety of problems and exercises, including benchtop experiments and simulations.

    3. Tests
    Two-hour tests occur in scheduled times in weeks 6, 10 and 13 and are held in-person in large venues. Each test covers two topics.

    4. Practicals
    Students complete 4 practical modules, each typically conducted as 2 three-hour sessions.
  • Learning Outcomes
    Course Learning Outcomes
    On successful completion of this course students will be able to:

    1 Apply circuit laws and theorems to predict the steady state behaviour of simple linear DC circuits.
    2 Use piecewise linear models to predict the steady state behaviour of simple diode and transistor circuits, AC and DC motors.
    3 Explain the transient behaviour of RLC circuits with reference to their differential equations.
    4 Simulate simple analog circuits to verify their behaviour.
    5 Explain the operation of circuits using transistors in switching mode to achieve a variable DC output.
    6 Demonstrate practical skills in the simulation, construction and testing of simple electrical and electronic circuits.
    7 Analyse and design simple digital systems based on combinational logic, state machine and programmed microcontroller approaches.
    The above course learning outcomes are aligned with the Engineers Australia Stage 1 Competency Standard for the Professional Engineer.
    The course is designed to develop the following Elements of Competency: 1.1   1.2   1.3   1.6   2.1   2.2   2.3   2.4   3.1   3.2   3.3   3.4   3.5   3.6   

    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)

    Attribute 1: Deep discipline knowledge and intellectual breadth

    Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.


    Attribute 2: Creative and critical thinking, and problem solving

    Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.

    2, 3, 7, 8, 9

    Attribute 3: Teamwork and communication skills

    Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.

  • Learning Resources
    Required Resources
    1) The following resources are available on the course website:

    • Slides: a complete set of lecture slides are available on MyUni.

    • Slide Presentations: these pre-recorded video presentations cover key concepts in the course. Students are expected to be familiar with this material in preparation for workshops.

    • Online tests: weekly formative tests are administered via MyUni.

    • Workshop questions

    • Practical instructions

    2) A toolkit containing prototyping boards and basic tools is required for the practical sessions. Purchase details will be provided via MyUni.

    Recommended Resources
    1) Practice Problems: are available on the course website.

    2) Additional Presentations: these pre-recorded presentations provide supplementary coverage of important concepts in the course.

    3) Reference Books: the course slides should provide sufficient information for many students, however you may find the following reference book useful if you are having difficulty with the material or are interested in learning more about any of the topics in this course. Copies of the book are available in the Barr Smith library. An eBook version is available via the library and a recommended reading schedule in provided in Course Readings on MyUnu

    Topics 1-4 A.R. Hambley: Electrical Engineering - Principles and Applications, 7th Edition, Pearson, 2018. 

    Topics 5-6 D. Harris and S. Harris: Digital Design and Computer Architecture, 1st or 2nd Edition, Morgan Kaufmann

    Online Learning
    This course will use a variety of online resources to support the learning process. Recorded slide presentations on key concepts, theory and methods will be made available prior to scheduled lectures, at which the content of the presentations will be discussed in more detail, in the context of applications and problem-solving exercises. It is essential that student view the slide presentations or read the slides before attending lectures.

    Video recordings of lectures will normally be made available on the course website after each lecture.

    In addition, the following material will be provided on the course website at the start or during the course of the semester:
    • slides, slide presentations, and tutorial questions
    • some past assessment examples (tests and exams)
    • additional practice questions

    All course announcements will be made via the course website..

    The use of the course discussion boards is strongly encouraged for questions relating to course material, but also for more general discussion on electrical and electronic engineering and technology. Anonymous posts will be permitted were possible, offensive posts will not. Lecturers will make a best effort to respond promptly to questions raised on the discussion boards.

    The course gradebook will be used to return continuous assessment marks. Students should check the gradebook regularly and confirm their marks have been correctly entered.
  • Learning & Teaching Activities
    Learning & Teaching Modes
    This course uses online content, face-to-face workshops, and practicals to achieve its learning objectives. The online pre-recorded presentations focus on key concepts and are supported by practice exercises to test and develop understanding. Workshops involve working in small groups on a variety of problems including theory problems, benchtop experiments and simulations. There is a small assessment component for active participation in tutorials. Practicals provide an opportunity to consolidate understanding and to develop hands-on skills with prototyping, testing and measurement.

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    Activity Detail Contact Hours Workload Hours
    Pre-recorded presentations 48
    Workshops 12 workshops 24 48
    Practicals 8 3-hr sessions 24 32
    On-line tests 11 tests 0 6
    End of topic tests 3 tests 6 18
    Total 78 152
    Learning Activities Summary
    Topic 1: Circuits, Sources and Loads
    Electrical concepts: charge, current, voltage Sources and Loads: power, resistors, sources
    DC circuit analysis: Kirchhoff’s laws, series and parallel resistors, voltage divider, current divider, Thevenin’s theorem, analysis strategies
    Energy and power: batteries, efficiency, maximum power transfer AC concepts: DC and AC, sinusoidal functions, AC voltage and current, RMS

    Topic 2: Power Supplies
    Diodes: ideal diodes, diode construction and operation, IV characteristic, ideal and first order models
    Half wave rectifiers: peak output voltage, capacitors, voltage ripple
    Full wave rectifiers: voltage ripple, transformers
    Voltage regulators: regulators, voltage doublers, inductors
    DC-DC converters: transistors as switches, RL circuits, switched regulators

    Topic 3: Machines and Power Electronics
    Machine concepts: force on a conductor, motor and generator action, commutation, DC motors, Faraday’s law, DC generators, AC motors
    DC machines: equivalent circuit model, torque/current and voltage/speed relationships, performance parameters, efficiency
    AC machines: rotating magnetic fields, synchronous machines, inductor motors, comparison of electric machines
    Power electronics: speed control of DC motors, pulse width modulation, H bridges, H-bridge drive of DC motors

    Topic 4: Linear Amplifiers
    Amplifier concepts: input resistance and output resistance, gain, offset, maximum output voltage and current, differential amplifiers
    Op-amps: concept, equivalent circuit model, inverting, non-inverting and summing amplifiers, power op-amps
    Transistors: principles of BJTs and MOSFETs, simple models, linear amplifier configurations
    Frequency dependent gain: frequency response, RC transfer function, cross-over frequency, low pass and high pass filters

    Topic 5: Combinational Logic
    Analog and digital electronics: analog and digital representation, applications of digital electronics
    Managing complexity: abstraction, modularity, abstraction, design communication
    Logic gates: Boolean logic, logic gates
    Digital logic technologies: discrete logic, FPGAs, microcontrollers, PLCs
    Boolean logic and algebra: Boolean equations, truth tables, algebraic simplification, Karnaugh maps
    Number systems: positional number systems, unsigned binary, signed number representation, hexadecimal, other binary codes
    Adders: binary addition, binary subtraction, adders, busses and bus notation

    Topic 6: Sequential Logic and Devices
    FPGAs: multiplexers, logic with memories, benefits of FPGAs, applications of FPGAs, how FPGAs work
    Sequential logic: combinational and sequential, synchronous and asynchronous, storage elements
    Moore finite state machines: synthesising finite state machines
    Microcontrollers: embedded computers, applications and benefits of microcontrollers, how microcontrollers work, program development Analog and digital signals: digital to analog converters, pulse width modulation, analog to digital converters, successive approximation conversion, sampled data systems
    Specific Course Requirements
    Laboratory clothing restrictions apply to the practical sessions: closed-toe shoes; covered shoulders; long hair must be tied back.

  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary
    Assessment Task Weighting (%) Individual/ Group Formative/ Summative
    Due (week)*
    Hurdle criteria Learning outcomes
    End of topic tests (3) 60 Individual Summative Weeks 6, 10, 13 1. 2. 3. 5. 6. 7. 8. 9.
    Weekly online quizzes  15 Individual Formative Weeks 2-12 1. 2. 3. 5. 6. 7. 8. 9.
    Practicals 20 Group Formative Weeks 2-12 Min 40% 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
    Workshop participation 5 Individual Formative Weeks 1-12 1. 2. 3. 5. 6. 7. 8. 9.
    Total 100
    * The specific due date for each assessment task will be available on MyUni.
    This course has a hurdle requirement. Meeting the specified hurdle criteria is a requirement for passing the course.

    In accordance with the Assessment for Coursework Programs Policy, Procedure 1bAn exemption from the stated hurdle requirements has been granted.

    Assessment Related Requirements
    A hurdle requirement is defined by the University's Assessment for Coursework Programs policy as "...an assessment task mandating a minimum level of performance as a condition of passing the course.

    In the Analog Electronics course practical component is a hurdle requirement. It is necessary to achieve at least 40% in this component otherwise the total course mark will be limited to a maximum of 44.

    It is important to note there is NO replacement assessment offered for the practical component after the end of Week 12. By arrangement with the Practical Coordinator, it will be possible throughout the semester for students who are falling significantly behind to have replacement opportunities. However, if students persistently neglect the practical component throughout the semester they are likely to not meet the hurdle requirement and hence fail the course without further opportunity for redemption. Exceptions will be made in the case of verifiable medical or compassionate circumstances beyond the student’s control.

    If a student fails to meet a hurdle requirement and is assigned a total mark for the course in the range of 45-49, then the student is entitled to an offer of additional assessment of some type. The type of assessment is to be decided by the School Assessment Review Committee when determining final results. The student’s final total mark will be entered at no more than 49% and the offer of an additional assessment will be specified e.g. US01. Once the additional assessment has been completed, this mark will be included in the calculation of the total mark for the course and the better of the two results will apply. Note however that the maximum final result for a course in which a student has sat an additional assessment will be a “50 Pass”.

    If a student is unable to meet a hurdle requirement related to an assessment piece (maybe throughout semester or at semester’s end) due to medical or compassionate circumstances beyond their control, then the student is entitled to an offer of replacement assessment of some type. An interim result of RP will be entered for the student, and the student will be notified of the offer of a replacement assessment. Once the replacement assessment has been completed, the result of that assessment will be included in the calculation of the total mark for the course.
    Assessment Detail

    No information currently available.


    No information currently available.

    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through Access Adelaide.

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

    The following changes have been made in response to student feedback from 2021:
    * Reduced assessment load: no exam, 3 2-hour tests instead of 5 1-hour tests
    * Weekly summary/review presentations and worked examples
    * Beginning to introduce more aspects of Universal Design for Learning to provide better support for all students including negotiated flexibility around class participation.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.

The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.