MECH ENG 7024 - Robotics M
North Terrace Campus - Semester 1 - 2016
The course information on this page is being finalised for 2016. Please check again before classes commence.
General Course Information
Course Code MECH ENG 7024 Course Robotics M Coordinating Unit School of Mechanical Engineering Term Semester 1 Level Postgraduate Coursework Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Assumed Knowledge MATLAB Course Description Two main categories: robotic manipulator and advanced robotic topics. Robotic manipulator includes: classification of robotic systems; transformation of coordinates; kinematics and inverse kinematics; Jacobians and robot dynamics; trajectory generation; modelling; control. Topics of Advanced robotics includes wheeled mobile robot; machine vision basics; introduction to air, space and underwater robots; robot plume tracing, mobile robot trajectory generation; robotics in mining; other new robotic developments.
Course Coordinator: Dr Tien-Fu Lu
The full timetable of all activities for this course can be accessed from Course Planner.
Course Learning Outcomes
1 Have a good understanding of the basics of robotic systems. 2 Be able to define the needs, acquire necessary information and select appropriate robots for various industrial applications. 3 Have a good understanding of robot design and development processes, and their vast applications. 4 Be able to apply the knowledge learned for the design and development of simple robots. 5 Have a good understanding and be able to explain the principles of robot kinematics, dynamics, motion planning, trajectory generation and control. 6 Understand the basics of machine vision for robotic applications. 7 Have a good understanding of mobile, aero and underwater robotics. 8 Have a good understanding of the pros and cons of applying robotics. 9 Have a deep understanding of the responsibility of engineers for the safety issues and the importance associated with the use of robots for various applications. 10 Team based small project activity to enhance interpersonal communication and skills. 11 Through introducing the history and new robotic technologies to understand the need to undertake lifelong learning.
University Graduate Attributes
No information currently available.
- Text book: Craig, J. J., Introduction to Robotics, Mechanics and Control, 3rd Edition, Addison Wesley, 2005 (available from Unibooks)
- Lecture notes available as printed copy from the Image & Copy Centre at the beginning of the semester and electronic copy available via MyUni;
- LOW, K.H., “Robotics, principles and systems modeling,” 2nd edition, Prentice Hall, 2004
- Schilling, R. J., Fundamentals of Robotics - Analysis & Control, Prentice Hall, 1991;
- Lewis, F. L., Abdallah, C. T., Dawson, D. M., Control of robot manipulators, Macmillan Publishing Company, 1993;
- Web sites, such as: www-sop.inria.fr/saga/personnel/merlet/merlet_eng.html.
- Other materials including journal and conference papers provided through out the semester.
Course related materials including announcements, lecture notes, tutorial materials, project information and so on will be made available in MyUni. Students are asked to access MyUni regularly (preferred at least once a week) for the course related information and materials throught out the semester. For more information, please visit MyUni Support.
Learning & Teaching Activities
Learning & Teaching Modes
- Lectures to cover the contents described in Section 1.1 course description and enhanced by videos and real life examples.
- Tutorials to support the covered contents adopting problem-solving principles.
- Assignments for students to exercise the knowledge learned.
- Small project to integrate not only the contents covered in the lectures but also to extend further beyond. Basic research skills will be briefed to students and it will require students to choose areas of interests to carry out one team based small scale project each group and write reports.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
In addition to fours hours a week for lectures, tutorial and project activities in classes, averaged three hours per week are estimated to be necessary to review the contents learned and work on assignments, tutorial questions and one team based project to achieve good learning results.
Learning Activities Summary
Introduction to robotic systems (1 hours lecture)
- definitions for various robotic terms
- industrial robots and applications
- mobile robots and applications
- parallel robots and applications
- New development and trends of robotics
Spatial descriptions (1 hour lectures, 1 hour tutorial)
- coordinate frames
- coordinate translation and rotation
- homogeneous transformation
- compound transformation
- raw-pitch-yaw and euler angles
- inversed rotation matrix
Kinematics (3.5 hours lectures, 2 hours tutorial)
- forward kinematics
- denavit-hartenberg notation
- joint space and cartesian space
- inverse kinematics
- solvability of the inverse kinematics problems
- algebraic solution and geometric solution
- pieper’s solution
- kinemtaics of parallel robots
Jacobians (3.5 hours lectures, 1hour tutorial)
- linear and rotational velocity of rigid bodies
- motion of the links of a robot
- velocity propagation from link to link
- angular and linear velocities of robot links
- static forces propagate from link to link
- Jacobians in force domain
Dynamics (4 hours lectures, 2 hours tutorial)
- Lagrangian formulation
- Kinetic and potential energy
- Euler dynamic formulation
- the force and torque acting on a link
Trajectory generation (2 hours lectures, 1 hour tutorial)
- joint space schemes
- cartesian schemes
Position and force control (1.5 hours lectures, 1 hour tutorial)
- control of manipulators
- control law partitioning
- trajectory following control
- nonlinear and varying systems
- model-based control for manipulators
- current industrial robot control systems
Wheeled mobile robots (1.5 hours lectures, 1 hour tutorial)
- classification of wheels
- mobile robot locomotion
- kinematics of wheeled mobile robot
- basic control of wheeled mobile robot
Image processing and analysis (1.5 hours lectures)
- histogram, edges, and other basics
- applying filters and noise reduction
- convolution mask
- sampling and quantization
- thresholding and connectivity
- binary image
- thresholding and hough transform
- binary morphology operations
- image analysis
- object recognition
- stereo imaging
- change detection
Machine vision for change detection using mobile camera (1.5 hours lectures, 1 hour tutorial)
- Issues related to illumination changes
- Issues related to mobile camera
- Change detection methods
Introduction to underwater, air and space robots (2 hours lectures, 1 hour tutorial)
- underwater robots
- aerial robots
- space robots
Robot plume tracing (1.5 hours lectures)
- insect robot and environment simulation
- plume and plume propagation
- plume tracking algorithms
- obstacle detection and avoidance
Indoor localization (1 hours lecture)
- problems of current indoor localization
- Angle-of-arrival method
- Received-signal-strength method
- Time-of-arrival method
Mobile robot trajectory generation (1.5 hours lectures)
- Vector field based method
- Time-dependent trajectory generation
Small robotic project laboratory/simulation work (10 hours project work)
In total, there are 38 hours lectures and tutorials. The number of hours for lectures; tutorial and project work are subject to vary slightly.
Specific Course RequirementsNot applicable.
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
- Assignments 20%: to exercise and apply the individual topic knowledge learned; objectives addressed 1, 2, 3, 4, 5, 8, and 9;
- Project 10%: not only to integrate, exercise and apply the learned knowledge but also exercise basic research; objectives addressed 6, 7, 8, 9, 10 and 11;
- Final exam 70%: to test how well students have learned the knowledge covered and how well the knowledge could be applied to solve engineering problems; objectives addressed 1, 4, 5, 6, 7, 8 and 9;
Assessment Related Requirements
Continuous assessment is required which needs the students to pass the assignments (averaged) and project to sit for the final examination.
- Assignments: Assignments will be set and related to the topics described in Section 4.3 learning activity summary.
- Project: Some small scale contemporary robotic projects will be given to students to choose from.
- Final exam: The final exam will be set to test the robotic knowledge learned.
Assignments and project report (hardcopy) need to be submitted with cover sheet to the submission box, which has the correct course label, located on level 2 of Engineering South building before the deadline. Students are required to use TURNITIN and attached the report to their project reports. Electronic copy of project report as well as programs developed for the project also need to be submitted to the email address that will be specified at the beginning of the semester. Every one day late submission (both assignments and project report) will incur 10% mark deduction. Due dates may be extended with genuine reasons which needs to communicate with the lecturer face-to-face or by emails. The turn-around timeline on assessments and the provision of feedback is two weeks after the submission deadline.
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending
Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through Access Adelaide.
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
- Academic Support with Maths
- Academic Support with writing and speaking skills
- Student Life Counselling Support - Personal counselling for issues affecting study
- International Student Support
- AUU Student Care - Advocacy, confidential counselling, welfare support and advice
- Students with a Disability - Alternative academic arrangements
- Reasonable Adjustments to Teaching & Assessment for Students with a Disability Policy
- LinkedIn Learning
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangement Policy
- Academic Honesty Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Elder Conservatorium of Music Noise Management Plan
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.
The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.